It should be printed on the radiator cap. Most are around 16 psi.
It should be printed on the radiator cap. Most are around 16 psi.
It should be printed on the radiator cap. Most are around 16 psi.
It is on the bottom, passenger side of the radiator.
It is where the lower radiator hose hooks to the engine.
Low coolant, inoperative radiator fan, plugged radiator, failed water pump, etc.
To unplug the oil pressure switch for a 1999 Chrysler Sebring 2.5, simply remove the connector from the back of the switch. With the switch unplugged, the computer will think the engine has low oil pressure.
Hot at an idle, 15-20 psi.
The thermostat is under the housing where the lower radiator hose attaches to the engine.
It is on the radiator side of the engine, behind the motor mount bracket.
It is under the housing where the lower radiator hose attaches to the engine.
The transmission on a Chrysler Sebring does not have a vacuum modulator.The transmission on a Chrysler Sebring does not have a vacuum modulator.
where do I find the battery on a 1999 Chrysler sebring, can't find it in the engine compartment?
A 1999 Chrysler Sebring does not have a mass airflow sensor.
passanger side of the car on my 1998, it is made of plastic so becareful not to force it or it will snap off and you will be replacing your radiator