0
What else can I help you with?
How many cubic meter per min is 14 cubic feet per min?
14 cubic feet/min = 14 (0.3048) x (0.3048) x (0.3048) cubic meter/min
Cubic inch and liters of an N-14 cummins?
The Cummins N14 engine was 855 cubic inches or 14 liters.
How many liters is a 855 CID engine?
14 liters, i think the conversion rate for liters to cubic inches is 1:61
How many wheelbarrows of river sand in 1 cubic meter?
It depends of course a bit on the size of the wheelbarrow and on how high you want to pile up the sand. But a typical wheelbarrow might hold about 85 liters of sand. 1 cubic meter equals 1,000 liters. So you would need about 12 wheelbarrow loads to get 1 cubic meter.
How many liters does a fish tank hold if it is14x8x8 inches?
14 inches by 8 inches y 8 inches = 896 cubic inches. 896 cubic inches = 6.2222 cubic feet. 6.2222 cubic feet = 176.19308 litres
The density of mercury is 14 gramscm cubed.what is the mass of 8 liters of mercury?
8 liters =8000 cubic cm therefore 8000 x 14 gm =11200gm
How many yards of dirt is 14 cubic feet?
14 cubic feet = 0.518 cubic yards
How many 6 cubic feet in 14 cubic feet?
The answer is 14/6 = 2.33...
How many liters equal 14 cups?
14 US cups = 3,312 4 liters
How many pounds of rock is 14 liters?
To convert liters of rock to pounds, you need to know the density of the rock. Most common types of rock have a density of about 2.5 grams per cubic centimeter, which translates to approximately 6.2 pounds per liter. Therefore, 14 liters of rock would weigh about 86.8 pounds (14 liters × 6.2 pounds/liter). However, this can vary depending on the specific type of rock.
How much area is 14 liters?
To determine the area that 14 liters can cover, you need to know the depth or thickness of the layer being applied. For example, if the liquid is spread in a layer that is 1 centimeter thick, 14 liters would cover an area of 1.4 square meters (since 1 liter equals 1,000 cubic centimeters, and 14 liters equals 14,000 cubic centimeters). The calculation changes with different thicknesses, so specifying the desired layer depth is essential for an accurate area estimate.
How many gallons of water in 1.4 cubic meter?
Formula (US): cups x 0.0625 = gallons14 x 0.0625 = 0.875 gallons1 gallon = 16 cups1 cup = 0.0625 gallons
