Best Answer

Different brands and models of toilets use different amounts of water per flush.

User Avatar

Wiki User

โˆ™ 2010-05-28 11:28:00
This answer is:
User Avatar

Add your answer:

Earn +5 pts
Q: How many liters of water will go out the drain if you flush the toilet bowl?
Write your answer...

Related Questions

What is the amount of water in the flush of a toilet?

Usually about 7 liters

How many liters of water does a toilet use when you flush it?


How many liters is used to flush a school toilet in Singapore?

approximately 1-2 litres of water is needed to flush a toilet.

How much water is used for a conservation toilet flush?

3 liters

When you flush your toilet the water rises in the bowl and the stuff doesn't flush away What is wrong?

The main drain is plugged. You may need to remove the toilet and snake directly down the drain.

How many liters of water to flush toilet?

Between 6 and 9 litres depending on the age of your toilet.

What percentage of water used in a house is flushed down the toilet?

* In the US approximately 40% of all domestic water consumed is flushed down the toilet. * an old-style single flush toilet can use up to 5.5 gallons (20 liters) of water in one flush, whereas more water efficient dual flush toilets average less than 1 gallon (4 liters) * replacing a traditional single flush toilet with a water efficient dual flush toilet saves about 21 gallons (80 liters) per person per day.

What is wrong if the sink and the bathtub will drain but the toilet wont flush?

The toilet itself is plugged or the pipe from the toilet to the drain is plugged. It may be that the tub and sink have their own drain pipe that may connect to the main away from the toilet drain. Plunge the toilet or sometimes if you fill a 5 gallon bucket with water and pour it into the toilet as fast as it will take it, that will flush out the line. It is a greater amount of water all at once an forces out what the clog is.

How much water does a dual flush toilet use?

Dual flush toilets usually use 3 and 6 liters of water depending on which way you push the flush handle - 3 liters for a little job and 6 liters for a major event. Single low-flush toilets use either 4.5 liters or 6 liters.

How many liters of water are used when flushing the toilet?

A new dual flush cistern will use 3 liters for a small flush and 6 liters for a large flush. Older cisterns will use more, sometimes as much as 20 liters. If you have a large cistern you can save water by putting a plastic bottle full of water into it.

Why do you hear the toilet flush in your bathroom sink drain?

The toilet and the sink both drain into the grey water waste lines. Because they are connected by piping, sound can travel through the pipes from the toilet to the sink.

How do you unclog your toilet drain when you flush all the water comes out under the bottom of the toilet onto the floor?

pull the toilet. Make sure the trap is clear on the toilet, and then snake the toilet line.

Why does the water in the bowl of the toilet drain when the bath tub is drained?

The tub and toilet connect to the same drain. There is not enough venting or how it is routed causes the tub to pull on the toilet to get venting causing a suction that lowers the water level or may cause it to flush.

Why would the water drain from the tank but not flush or suck the water down through the toilet bowl when you flush?

Do the rest of the fixtures in the bathroom drain well? If they do not drain well, my guess would be the venting of the plumbing system. If all of the other fixtures in the bathroom drain well, then there is probably something in the trapway of the toilet. Assuming it is just the toilet that is having problems, then a closet auger might do the trick. Hope it helps.

How many liters of water are used to flush a toilet?

It can take a rough average of between 6 and 18 liters (litres) of water to flush a household toilet. This is dependant on many factors though.Usually, most toilets average around 6 litres, but they vary. The numbers of gallons and litres are usually behind the cover to the toilet.

How much water is saved per flush with a high efficiency toilet?

about 8 liters

How much water do you use when you flush the loo?

You use anywhere from 1 cup of water to 5 cups of water to flush the toilet. This is per time you flush the toilet.

How much water does a low flush toilet save a month?

If the toilet works each time on one flush, they use roughly half the water of a standard toilet. You would then use half as much a month on the toilet. They do not always flush completely on the first flush and the toilet is only a part of the water bill.

How can you flush a Sloan flushmate when the water supply is temporarily unavailable.?

You would need to use a container of water like a 5 gallon bucket and pour it into the toilet. As you pour it in, the excess water will cause the toilet to drain.

What could cause a toilet to lose suction power and sometimes not even take down the water?

Home toilets do not use "suction power" to flush. The inertia of the water falling from the tank when you flush pushes water through the trap and down the drain. If there is any significant amount of blockage in the drain, the water will not be able to move at enough velocity to get past the trap. In other words, if the drain is blocked, water can't flow fast enough to flush. You'll need to get the drain cleaned out to make it flush.

Your toilet is not flushing completely you have to plung to get it to flush Sometimes you have water backing up in your bathroom sinks?

You should get your drain lines snaked

How much water is used in one flush of a toilet?

The average toilet today uses about 1.5 gallons of water per flush

How many milliliters of water does it take to flush the toilet?

It depends how big your cistern is. Modern dual-flush toilets have a minimum flush of 6 liters. There are 1000 milliliters in one liter, so the flush would contain 6000 ml.

What is water cistern?

A water cistern is the part of a toilet that holds water which is then used to flush the toilet.

Plumber problems the drain makes gurgling sounds when you flush the toilet and the water goes down in the toilet when the other toilet gets flushed?

either the vert is plugged and there is no air getting through or there is no vent at all