I was looking for information on this, but could only come up with this taken from website: www.homeenergy.org/archive:-
As we grow older, the amount of light required to perform a task such as reading a newspaper increases dramatically (for most people starting at about age 40). The light level needed continues to increase at almost geometric rates. Senior citizens particularly need high levels for activities like reading. If an auditor/installer finds a lot of 150-watt light bulbs in a house, there is probably a good reason. No single CFL currently available on the market that can match the output of a 150-watt lightbulb (although installing a socket doubler with two high-wattage CFLs will do in most circumstances). Attempting to replace a 150-watt incandescent with a 27-watt CFL will not work. The CFL will be removed quickly and the old 150-watt incandescent will be back in service.
This is roughly 500 lumens
No. 480 lumens is about the output of a 40 watt light bulb, and that will not make a very good flood light.
From 20,000 to 23,000 lumens depending on the brand.Average figures:Incandescent: 10 lumens per wattHalogen 13 lumens per wattCFL (low-energy) 50 lumens per watt
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
One lumen makes up 1 ANSI lumen as they both measure the same output of light. ANSI lumens are used exclusively for measuring the output of projectors.
A good projector will have 2000 or more lumens, but an LED projector will have much less.
This is roughly 500 lumens
700 lumens
Approximately 15 lumens per watt for halogen, so 300 lumens.
No. 480 lumens is about the output of a 40 watt light bulb, and that will not make a very good flood light.
From 20,000 to 23,000 lumens depending on the brand.Average figures:Incandescent: 10 lumens per wattHalogen 13 lumens per wattCFL (low-energy) 50 lumens per watt
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
21
One lumen makes up 1 ANSI lumen as they both measure the same output of light. ANSI lumens are used exclusively for measuring the output of projectors.
About 80 lumens per watt of electric power is normal for LEDs.
A 400 watt Mercury vapor light bulb produces roughly 23,000 lumens. In comparison to a 400 watt metal haloid and or high-pressure sodium, not as good. Metal haliod and high-pressure sodium produces 30,000 lumens.
50