Want this question answered?
a 18watt plc fluorescent tube renders 1800lux
According to SCL Direct website a 28 watt 2D lamp has an initial lumens output of 2050.
Depending on the brand, it will give about 18.000 Lumens and equals a 100W HPS lamp
It will probably be stated on the packet, but I doubt it will be higher than the standard bulb which is about 1200 lumens.
From 20,000 to 23,000 lumens depending on the brand.Average figures:Incandescent: 10 lumens per wattHalogen 13 lumens per wattCFL (low-energy) 50 lumens per watt
9000- 11000
It's about 600 lumens. The same brightness comes from a 12 Watt compact fluorescent light (CFL).
a 18watt plc fluorescent tube renders 1800lux
To answer this question the voltage has to be given. I = W/E. Amps = Watts/Voltage.
About 300.
According to SCL Direct website a 28 watt 2D lamp has an initial lumens output of 2050.
Depending on the brand, it will give about 18.000 Lumens and equals a 100W HPS lamp
It will probably be stated on the packet, but I doubt it will be higher than the standard bulb which is about 1200 lumens.
From 20,000 to 23,000 lumens depending on the brand.Average figures:Incandescent: 10 lumens per wattHalogen 13 lumens per wattCFL (low-energy) 50 lumens per watt
Currently maximum LED luminous efficiency is about 114 lumens/W, measured at 50mA. Average luminous efficiency is about 104 lumens/W. Ordinary LED light effect is about 60 lumens / W. 18W is about 130 lumens is about 1080 lumens.
The amount of lumens that are emitted from a fluorescent lamp is given approximately by the luminance (cd/m^2) times the length (m) times the diameter (m) times pi squared. Unfortunately, we don't usually know the luminance.The number of lumens varies greatly from bulb to bulb, across the various types of fluorescent technologies. One rule of thumb, that won't apply to every type of fluorescent lamp, is to multiply the rated wattage by 80 (lm/W) to get the number of lumens.If so, a 40 watt fluorescent lamp will output about 3200 lumens, but, as you will find elsewhere, on Wikipedia:-100 W tungsten incandescent (220 V): 1380 lm100 W tungsten incandescent (120 V): 1750 lm.So the above information does not seem quite right for a 40 watt fluorescent bulb.Furthermore, for the analysis to be accurate, one has to realize that light can be either focused as in a laser or dispersive as in an incandescent bulb or fluorescent tube. Lumen ratings given with a square meter to distance ratio would help a lot but are not often given.Technical information is sometimes printed on the boxes which fluorescent tubes come in from the factory. For instance, on one box of compacts fluorescents it states that a 100 watt compact fluorescent will put out 1700 lumens. Dispersive of course. For further information see the Related links shown below.
in a compact flourescent about 8mg.