There will be at lease three and on some conduits additional information. There will be the manufacture's name, type of material the conduit is manufactured from and the diameter size of the conduit. For example Scepter PVC 100 mm (for American customers 4") conduit.
Welding is not allowed by the NEC (United States' code).
Another name for thin wall conduit is EMT and stands for Electrical Metallic Tubing. The term thin wall is used to differentiate between two conduit systems, thin wall and rigid conduit systems.
If you are talking about the primary wires to the transformer then yes they have to be encased in concrete.
There are no voltage regulations. A rigid conduit system used two locknuts and one bushing at every connection to a junction box unless the box has a hub. One outside the box and the other locknut inside the box. These are tightened against each other to make the connection secure and to scratch the paint on the outside of the box to make continuity of the metallic system. Continuity of the system is a must as this is the return path for any short circuit that might occur. Rigid connections to fittings require no locknuts as the conduit's threaded end screws into the fitting.
RSC pipe - Rigid Steel Conduit (RSC) can be installed indoors or outdoors, in dry or wet locations, exposed or concealed, in all kinds of atmospheric conditions, and in hazardous locations.
4 inch rigid conduit
4 inch rigid conduit
rigid metal intermediate metal rigid nonmetallic
In electrical terms it represents Rigid Steel Conduit. It is also known as Rigid Metal Conduit (RMC).This is not to be confused with Electrical Metallic Tubing (EMT) also known in the trade as thin wall conduit.
One problem of using rigid conduit in a residency when it is not needed is that project will very quickly over run the budget of the project. Labour will be at least 5 times more expensive to install rigid over NMD90 cable.Another problem will be the tight bends required in home wiring as compared to the radius bends that rigid conduit requires.
A 770 Greenlee hydraulic pipe bender bend is used for rigid steel conduit from 2" to 4".
depends on size....
There are many types of conduit used for the containment of electrical wires. PVC is a non-metallic option. If you need something that provides mechanical protection, EMT is a steel conduit with a thin wall. Need even more mechanical protection, you can use rigid conduit. It comes in steel or aluminum, and must be threaded together.
Welding is not allowed by the NEC (United States' code).
2 inch
does anyone know this answer does anyone know this answer
Another name for thin wall conduit is EMT and stands for Electrical Metallic Tubing. The term thin wall is used to differentiate between two conduit systems, thin wall and rigid conduit systems.