The answer is 1,672 tonne (metric ton).
Please specify exactly the type of this fuel to find the density in catalogs.Also kilogram/metric tonne is not a unit for density.Generally petroleum diesel has a density of 0,832 kg/L or 832 kg/cubic meter.
To convert cubic meters to tonnes, you need to know the density of the material you are measuring. Multiply the volume in cubic meters by the density in tonnes per cubic meter to get the weight in tonnes. The formula is: weight (tonnes) = volume (cubic meters) * density (tonnes per cubic meter).
To convert cubic meters to metric tons of fuel oil, you need to know the density of the fuel oil in metric tons per cubic meter. Once you have the density value, you can multiply the number of cubic meters by the density to get the mass in metric tons. The formula for this conversion is: Mass (in metric tons) = Volume (in cubic meters) x Density (in metric tons per cubic meter).
=~1t. or 1000kg
2.4 tonnes/cubic meter
With dry sand. 1.602 tonnes
You can't, unless you know the average density of the cargo. A cubic metre of machinery is going to weigh serveral tonnes, a cubic metre of water approx one tonne. Try a freight/shipping company to find whether they have a conversion, but most I've spoken with just go by volume, regardless of weight.
You need material density in tonnes per cubic metre Then: > multiply by: 1.000 to get metric tonnes 0.984 to get long tons 1.102 to get short tons > note: metric tonne = 1000 kilograms long ton = 2240 pounds short ton = 2000 pounds
The weight of coarse aggregate required to fill one cubic meter depends on its density, which typically ranges from 1,500 to 2,500 kilograms per cubic meter. Therefore, one cubic meter of coarse aggregate generally weighs between 1.5 to 2.5 tonnes. For example, if using a density of 2,000 kg/m³, one cubic meter would equal 2 tonnes. Always check the specific density of the material being used for accurate calculations.
Density of normal concrete = 2.4 Tonne / cu metre.Density = mass / volumeSo >Mass = density * volume = 2.4 * 5000 = 12000 tonnes.
The density of premix asphalt typically ranges from 2.2 to 2.4 metric tons per cubic meter. This means that 1 cubic meter of premix asphalt would weigh between 2,200 to 2,400 kilograms. To calculate the density per metric ton, you would divide the density range by 1,000, resulting in a density of 2.2 to 2.4 metric tons per cubic meter.
The conversion factor from cubic meters to metric tons depends on the density of the substance being measured. To convert, you need to know the density of the material in question in units of metric tons per cubic meter. Then, you can multiply the density by the volume in cubic meters to determine the mass in metric tons.