1000 ohms.
Multiply by 1000. 1K ohm = 1000 ohms
In a 12VDC circuit with a 1K load, there will be 12ma of current. (Ohm's law: Volts = Amps * Ohms, so Amps = Volts / Ohms.)
If the question means to indicate multiplication, then the product is 75,000 cubic ohms.This quantity has no physical meaning or significance.
It is a passive electrical device with a resistive value of 1000 ohms, used for limiting current or dropping voltage.
1000
1,000 ohms and 3,000 ohms in series = total effective resistance is (1,000 + 3,000) = 4,000 ohms.Power dissipated = I2 R.I = sqrt( P / R ) = sqrt (.025/4,000) = sqrt(6.25 x 10-6) = 0.0025 AVoltage drop = I RAcross 1,000 ohms, V = 1,000 I = (1,000 x 0.0025)= 2.5 volts.
If by 1k you mean 1 kilogram (kg) then:1 kg = 1000 g
You can consider a short circuit to be a resistor with R=0 Ohms. It is then clear by the equation for calculation of parallel resistance that the combined resistance of a resistor in parallel to a short circuit is 0. Consider the following example with R1= 1k Ohms and R2= 0 Ohms: Rtotal = R1*R2 / (R1+R2) = R1*0 / R1 = 0 Ohms.
That is 366,300 ohms.
3500 Ohms
I think you mean the meter is rated at 1K ohms per volt. It means that with a series resistance designed to give FSD at any required voltage, the total series resistance must be 1000 ohms per volt (100K ohms for 100volts) . This is because 1K ohms per volt is just another way of saying that the full scale reading occurs at 1mA current. In that case a full scale deflection for 100 volts applied, 1mA is obtained with a total resistance (meter + added resistance) of 100 kOhms which is your loading resistance.
.62 miles