0
34 pins in a FDD cable connector.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What two connections should be provided to a floppy disk drive during installation?
a cable from the power supply to the Berg power connector on the FDD a cable from the 20-pin ATX power connector socket on the motherboard to the Berg power connector on the FDD
What is fdd data cable?
FDD cable is for floppy disk drive (FDD).
What is a FDD connector?
fdd is a floppy disk controller. this is you will hoke it up
Explain how the two available drives on FDD data cable are distinguished?
Floppy data cable is 34 pin flat cable having two connectors for floppy drive. The floppy drive connected at the end connector is A: and the another connector disk is B:..
What happens when you install a floppy drive cable backwards?
The floppy drive data cable has a stripe denoting pin #1...PIN #1 on the FDD cable must be aligned with PIN #1 on the drive connector, or the drive will not work...This misalignment does not damage the drive, but the activity light will stay on constantly...To correct this, turn the computer off, reconnect the data cable aligning the pins correctly & reboot the computer....
Why LED of FDD is Continuously glow?
This is a question from the A+ test!!!!!! The answer is that the cable is reversed at one end. The cable must be plugged in correctly at both the ends. The red wire on the cable shows the pin 1 end of the connector and must be plugged in correctly on the MB and the drive.
What are 3 types of ribbon cables you might find inside a PC?
-Sata Cable -IDE Cable -Molex/Sata power cable Other possible -SCSI Cable -Floppy cable -SLI/Crossfire Cable -12V 24 pin Motherboard connector -12v 4-pin CPU Connector -12v PCI-e Connector
What two cables connect to the hard disk?
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
Which connections should be provided to a floppy disk drive during installation?
Connecting a floppy Drive in a Desktop ComputerYou should connect the 4-Pin 12 Volt non-molex Connector from the power supply to the power input of the Floppy Disk Drive, also the IDE ribbon cable from the FDD output on the Main-board to the FDD input on the Floppy Disk Drive, with the pink stripe on the outside of the FDD Input & Output sockets, it is important to make sure you are grounded to the case whilst doing this with the PC Power Cord plugged in but switched off
Can someone explain the difference between P and you insurance and FDD insurance?
FDD insurance is normally using in shipping insurance sectors. FDD is an abbreviation of 'Freight Demurrage And Defence'
Full form of FDD?
FDD means floppy disk drive,....., it also means Feature Driven Developement in terms of UML.
The definition of 1.44 Mb 3.5 FDD?
Do you mean "1.44MB 3.5 inch FDD"? This means a floppy disk drive (FDD) for disks which are 3.5" wide and have a maximum storage capacity of 1.44 megabytes.
