Parallel ATA connectors use a 40 pin female connector with one pin removed for keying.
34 and a IDE Cable has 40
40 =]
44 pins
44 pins
7 wires
7 pins
7 pins
I'm pretty sure that I don't know! YOu better thank me for this
IDE Cable (40 Pins for Hard Disk and CD/DVD)Sata Cable (For SATA Hard Disk)34 Pins Flat Cable (For Floppy Drive)80 Pins SCSI Cable (Normally in Server, Not in Desktops)USB header cableGame Port header cable
7
Differences between PATA and SATA hardrive are most visible in regards to the cables. A PATA hard drive has what is called a ribbon cable which is kind of big compared to the small SATA cable. The PATA ribbon cable has 40 pins that connect to the hard drive and/or motherboard whereas the SATA cable only has 7 pins allowing for the computer as a whole to be much cooler due to more empty space inside it for air to flow more freely. Also, I believe that the SATA drives are faster than IDE or PATA, especially if it is a SATA III which can transfer at speeds up to 6 gbs/per second.
there are 53 pens.
Parallel ata cable connecter have 40 pins.
Hard Drive configuration is used to define the Slave and master Hard Drive. When we are attaching more than one hard drive the configuration is used. Configuration is done by jumper setting which is available in back side of hard drive...1st two pins for master hard drive and last pins are slave..
Each cable is designed to support exactly one drive.
Arrangement of Jumper pins on Hard Drive
There's different types of connections that lead to a hard disk. you'll have to ellaborate your question.But..... I can tell you what the wires are....There's the ribbon cable. (flat and wide cable that connects to the back of your drive to the motherboard)The Molex plug (white and it has four pins) that powers your hard disks, it leads to the power supply.OR... The SATA power connector (which is black, has 5 wires (red, yellow, 2 black, and one orange) which connect to the back of your hard diskThere's also the SATA data transfer cable, it's a thin (usually red) cable that connects to the motherboard to your hard drive. (it's a thin "L" shaped slot)