Look on the drivers door for a tag specifying the load ranges.
The gas tank on the 2006 Mazda MAZDA3 holds 14.5 gal.
The gas tank on the 2006 Mazda MAZDA6 holds 18.0 gal..
The gas tank on the 2006 Mazda MX-5-Miata holds 12.7 gal..
Press and hold the power button and media button simultaneously for 10sec, then release the media button.
The 1992 Mazda B2200 will hold close to 17 gallons of gas. The 1992 Mazda B2200 is a four-cylinder vehicle.
How many quarts of automatic transmission fluid does the 2001 Toyota Avalon automatic transmission hold?
From empty the manual will hold about 5The gas automatic holds about 12The diesel automatic holds about 16From empty the manual will hold about 5The gas automatic holds about 12The diesel automatic holds about 16
The "Hold" light on a Mazda Miata indicates that the vehicle's automatic transmission is in "Hold" mode, which prevents the transmission from shifting into higher gears. This feature is typically used to provide better control in slippery conditions or during towing. When the light is illuminated, it suggests that the driver has activated this mode, and the vehicle will prioritize lower gear operation. If the light remains on unexpectedly, it could indicate a malfunction that may require further inspection.
In a 1999 Mazda Premacy, the "Hold" light indicates that the automatic transmission is in "Hold" mode. This mode prevents the transmission from shifting into higher gears, which can be useful for maintaining power during steep inclines or when towing heavy loads. If the light is illuminated, it suggests that the vehicle is currently operating in this mode. If you did not intentionally select this mode, it may be advisable to check the transmission settings or consult the owner's manual for further guidance.
To hold 150 pounds of air, a whole lot of them. To hold 150 pounds of water, around 34 of them. To hold 150 pounds of stones or lead, not many at all.
i read in another answer that there is a transmission hold to keep it in gear longer.. you may have that pressed and the car wants to gear down but can't. i have no idea but its a suggestion.. mike
If the "hold light" flashes on an '89 Mazda 626, it typically indicates an issue with the automatic transmission. This warning light can signal that the transmission is in "limp mode," meaning it has detected a problem and is limiting performance to prevent further damage. It’s advisable to check the transmission fluid level and condition, and if the light persists, have the vehicle inspected by a mechanic for diagnostic trouble codes.