None, it's diesel!
On the inline six cylinder engine , spark plug # 6 is the rear spark plug On the V6 engine , spark plug # 6 is the rear plug on the drivers side of the engine On the V8 engines , spark plug # 6 is the 2nd plug from the front on the drivers side of the engine
Generally there is one spark plug per cylinder.
The correct spark plug gap does not depend on which plug you use, it is dependant on what engine it is installed in. The same plug can be used in many different engines, and each engine might have a different gap specification. Instead, you need to ask something like: What is the correct spark plug gap for a 1993 Chevy 350 engine? (or whatever engine you have).
No There are many types of spark plug. They differ in size, heat range and amount of electrodes fitted. To avoid damage to an engine always use the recommended spark plug for that engine. The wrong plug will cause massive engine damage at times.
Count the spark plug wires
It is important to gap the spark plugs of an engine. The spark plug gap measurement for this engine is 0.044 inches.
Remove the spark plug wire from the spark plug. Use some heavy gloves or a set of insulated pliers to hold the spark plug wire about 1/4-inch from the engine block (ground) and crank the engine - you should see a spark jump from the wire to the engine ground. For a better check, use another spark plug and put it on the spark plug wire and use it as a "jumper" from the wire to the engine ground.
the spark plug provides the spark necessary to ignite the fuel and air in the engine, which allows your engine to run. without spark plugs, your engine wouldn't start.
bad spark plug wire.
what is the right spark plug gap for a 4.7 4 wheeler engine
The 1976 351 Ford engine spark plug gap is .034. Most spark plugs will come pre-gapped from the spark plug manufacturer.
The spark plug gap in your 1999 Chevrolet suburban is dependent upon the type of engine. The standard engine spark plug gap is .011.