300sqmm cable i will use
A "live" cable is used to supply a voltage potential to a load.
1.6mm or 14awg
The purpose of a cable puller is to allow a system of wires to pull a heavier load. A cable puller will then be used to feed the cable through on this system.
35 KVA generator using for load 100 meter length which cable need to used
There are many companies and websites that offer black cable ties and they have many uses. One of the biggest use of black cable ties is to be used for outdoor applications.
Copper SE cable gauge 00 from the meter socket to the breaker panel for a 200A service. Then 8, 10, 12, and 14 gauge wire depending on the load.
No find and use a PS3 A/V cable there are many unused around as many people used a HDMI cable instead of the cable that came with the PS3
When using a straight through cable for networking, only 3 pairs are used.
Nine wire
The calculations are worked backwards from the amps used by the load of the circuit. This will be used to select the correct size of the wire. Some stipulations are added depending of the ambient temperature, length from the supply or if the load is a motor. Fusing is then dependant on the wire size that is used.
With the proper cap configuration on the DC cable, yes it physically can be done. If there is a DC load connected to the end of the DC cable, the load would be destroyed by the application of AC voltage being applied to it. Why anyone would consider doing this type of procedure is anyone's guess.
A pulley is a wheel with a groove on its edge for holding a rope or cable. pulleys are usally used in sets desinged to reduce the amount or force needed to lift a load.