You can't convert that. Those units measure different things.
80 ft * 230 ft = 18400 sq ft = 0.4224 acres (to 4 dp).
24.384 m 1 m = 3.28 ft 1 ft = 0.3048 m
2.2 meters is7.21784777 feetDirect Conversion Formula 2.2 m* 1 ft0.3048 m=7.217847769 ft
Multiply the two dimensions to get the area. The calculation will give you 80 square feet.
The impact velocity of a rock thrown horizontal from a cliff depends on two things, the initial speed of the rock (vi) and the height of the cliff (h). The final velocity (impact velocity) is represented by vfFor this formula, air resistance is neglected, and acceleration due to gravity is assumed to be 9.8 m/s2. The acceleration is positive here because down is being treated as the positive direction. You will get the same result if you use negative 9.8 m/s2 and make the height negative. sqr() means square root.vf = sqr(19.6h + vi2)For example if the rock was thrown off a 3 meter high cliff at 20 m/s, the impact velocity would be sqr(19.6 x 3 + 202), which would be sqr(58.8 + 202), which would be 21.42 m/s.The angle relative to the ground is the inverse tangent of sqr(19.6h)/viwhich in this case is tan-1( sqr(19.6 x 3)/20), which is tan-1(7.67/20) which is 21.0 degrees.
10 000 sqr ft == 1 hectare
392040 sqr ft
Square root of (18*18+80*80) sqr(324+6400) sqr(6724) 82
1 shotangsho = 436 sqr feet (approx)
Pi x D2 / 4 = area ft2 = 3.142*8*8/4 = 50.272 square yard = 9 sqr ft (3*x3) thus 50.272/9 sqr yrds in 8 ft diameter = 5.586
Since there are 9 square feet in a square yard - the answer is 13 !
80 ft X 544.5 ft = 43560 square ft which is equal to 1 acre.
There are 0.3125 16x16 squares in 80 sq ft.
Are the '76' and the '80' talking about feet ? Inches ? Meters ? Furlongs ? IF those numbers mean "76 ft" and "80 ft", and IF they are the sides of a rectangle, then the area is (76 ft x 80 ft) = 6,080 sq ft
Emergency egress requirments. 5.0 sqr ft at grade level and 5.7 sqr ft below or above grade (second floor and above). 24" clear opening height minimum. 20" clear opening width minimum.
264.46 ft Direct Conversion Formula 80 m* 1 ft 0.3048 m = 262.4671916 ft
80 of them.