500 MCM can carry 380 Amps at 75 degrees C.
Wire sizes from 250 to 500 MCM conductors all have 37 strands within the cable.
That is not home wiring. I would use 4/00 gauge. <<>> A 750MCM wire with an insulation factor of 90 degrees C is rated at 500 amps. A parallel run of two 500MCM will give you 1000 amp capacity.
That is 10 amp wire.
10
From a 120 Volt supply, the Amp rating is calculated as 2,000 Watts (which is 2kW) divided by 120 Volts = 16.7 Amps.
Yes. The rating of a relay is how much current it can switch on and off, not how much it uses or must have.
That is not home wiring. I would use 4/00 gauge. <<>> A 750MCM wire with an insulation factor of 90 degrees C is rated at 500 amps. A parallel run of two 500MCM will give you 1000 amp capacity.
That is 10 amp wire.
500 mcm (or 500kcmil) conductors are used for 400 amp 480v single phase or 3 phase systems. The wire AND THE TERMINALS must be rated for 90o Celsius.
You need to instal the same size and amp rating as you removed.You need to instal the same size and amp rating as you removed.
3Amp
1 ton ac amp
yes two fuses in parallel will increase the amp rating but its not a good practice try to get the proper fuse!
50 amp
10
From a 120 Volt supply, the Amp rating is calculated as 2,000 Watts (which is 2kW) divided by 120 Volts = 16.7 Amps.
Yes. The rating of a relay is how much current it can switch on and off, not how much it uses or must have.
10mm2 : 40A