1 inch pound force = 0.0833333333 foot pounds
90 inch - pounds (torque) = 90 / 12 = 7.5 foot pounds (torque)
You could have 'newton-centimeters', or 'newton-inches', or 'pound meters' etc., but you can't have 'newton pounds'. Torque is (a distance) x (a force), but 'newton pound' is (force) x (force). Whether or not that has any physical significance at all, it's surely not torque.
Torque and horsepower are two separate ratings.
The deca Newton meter of torque is 0.1 to one Newton meter. In relation to the kilo meter of torque, it is .001. Many converters are available online for torque measurements.
You need six pounds of pressure to torque.
how install torque converter 94 explorer
There are many automatic torque testers. You can buy a torque testers or local car shops may also offer torque testing services.
Torque to 11 lb/ft
Tighten the drain plug using a two-finger rule till it feels snug(drain plug requires less torque [15 - 25 ft. lbs] than many torque wrenches can be set to, many begin at 25-30ftlbs)so best to NOT use a torque wrenchhowever, if you have a smaller torque wrench , I found this information elsewhere"For the 4.0L six-cylinder, torque the drain plug to 18 foot-pounds of torque. For the 4.6L eight-cylinder, use 19 foot-pounds of torque."
A foot pound is a measure of energy while a pound is a measure of mass, so under normal circumstances there can be no conversion. However, using Einstein's equivalence of mass and energy, is would be approx 8.15*1016 Joules.
It is not really answerable, depends on many factors. Bolt size thread pitch of the bolt material the bolt is made of that material the bolt is screwed into lubricated/unlubricated and what with what it was initially torqued to If you have Snap on tech100/250 torque wrench it will give you a final torque #, I have seen torque readings double the intial torque # after the 90 degrees.
4 times