To figure that out you need to know the Amperage that it draws and what the voltage of the circuit is that you're using. Once you know that you can figure out how many watts it uses by doing simple math.
Voltage x Amperage = Watts
Look on the back of the equipment for a manufactures label. If the wattage is not on the label just use this equation Watts = Amps x Volts. This will give the wattage that the piano uses whenever it is turned on.
The electric heater will have power rated in Watts. The Amps it will draw depends on the voltage system you are using. Can be calculated by formula I (Amps) = P / V In the USA with 110V system a 2400W heater will draw 2400 Watts / 110 Volts = 21.8 Amps In Australia with a 230 V system a 2400W heater will draw 2400 Watts / 230 Volts = 10.4 Amps
45 watts
Some where on the electric piano there will be a manufactures label. When you find it the voltage and amperage will be stated. To find the wattage use the formula W = Amps x Volts.
Hoovers use 1000 - 2000 watts
Power = Volts * current [p = E*I]; 120volts*10amps = 1200watts
for a large one it is 4,000 watts and for a smaller one it is 1,000 watts
It depends on the motor size. If 750 watts, then, 750/240 = 3.125. So use the next size up - 5A fuse
Electric lights that use from 0.02 watts to 50,000 watts have been manufactured. The CFLs, fluorescent tubes, and incandescent bulbs in your house probably operate in the range of 20-100 watts.
To determine the number of watts of electric energy consumed by electric iron, we need to multiply the volts and the ampere used by that particular electric iron, so the product of those two is the watts used by the electric iron.
Use a carbide tipped drillbit in a regular electric drill. - Using a hammer drill will crack brick.
it drills it but not very effectively
Volts and watts are different quantities and their relationship also includes the electric current. Voltage times current in amps equals the power in watts use.
Yes, but the drill will run slower.
Look on the back of the equipment for a manufactures label. If the wattage is not on the label just use this equation Watts = Amps x Volts. This will give the wattage that the piano uses whenever it is turned on.
9200
Found in his apartment at the time of his arrest was a claw hammer, handsaw, electric drill with 3/8" and 1/16" drill bits.