answersLogoWhite

0

To determine the watts needed to run a 12-volt drill charger, you can use the formula: Watts = Volts x Amps. If you know the amperage of the charger, you can multiply it by 12 volts to find the wattage required.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

How many watts does my 12 volt 2 amp battery charger draw?

Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts


How many watts does a 36 volt battery charger use?

Assuming 100% efficiency, a 36-volt battery charger would use 36 watts per hour to charge the battery fully. However, it's important to consider that chargers are not 100% efficient and may draw slightly more power from the wall.


Can you use a 12 volt 1200mah charger to charge a 9.6 volt Ni-MH 3500mah battery pack?

It is not recommended to use a 12 volt 1200mah charger to charge a 9.6 volt Ni-MH 3500mah battery pack as the voltage and current ratings are different. Using a charger with a higher voltage may damage the battery pack and pose a safety risk. It is important to match the charger voltage and current ratings to the specifications of the battery pack.


How large a 110 volt generator is needed for a 40 amp 12 volt battery charger?

amps*volts=watts 40 amps *12 volts= 480watts watts/volts=amps 480watts/110volts=4.36363636amps So you need a 110 volt generator that can produce about 5 amps as a bare minimum. To take into account system heat loses that occur when converting power consider doubling it to be safe. (this is over kill but the advantage is that your generator is not working at full capacity at all times)


Where can a 18 volt drill be bought?

An 18 volt drill can be bought from many physical stores and online stores too. Physical stores such as Target and Home Depot carry this drill, as do the online sites Amazon and eBay.

Related Questions

How many watts does my 12 volt 2 amp battery charger draw?

Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts


How many watts does a 36 volt battery charger use?

Assuming 100% efficiency, a 36-volt battery charger would use 36 watts per hour to charge the battery fully. However, it's important to consider that chargers are not 100% efficient and may draw slightly more power from the wall.


What kind of charger is required for a Black and Decker Pivot Plus Drill Drive?

A 6 volt Ni/Cad charger is needed.


How many watts need for seven ampere's and 120 volt's?

770 watts.


Can you charge a 5 volt battery with a car charger?

No, an automobile battery charger outputs 12 Volts. This is far too many volts to charge a 5 Volt battery. You would destroy the 5 Volt battery with this charger.


How long should you charger a 7.2 battery with a 9.6 volt charger?

You do not charge a 7.2 volt battery with a 9.6 volt charger period unless you want to ruin the battery. You charge it with a 7.2 volt charger.


Can you charge an 8 volt battery with 6 volt charger?

No, you cannot charge an 8 volt battery with a 6 volt charger. The voltage of the charger must match the voltage of the battery.


Will a 14 volt charger hurt a 18 volt battery?

Yes, an 18 volt charger can damage a 14 volt battery. This is because the wattage for the battery needs to be equal to the wattage of the charger.


How many amperes in a watt and how many watts in a volt?

Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts


Can a 12 volt charger charge a 8volt battery?

No, a 12 volt charger will overcharge a 8 volt battery and destroy it.


How many watts in 1 ampere 230 volt?

Watts = Amps X Volts Grab your calculator!


How do you equalize a 6 volt marine battery with a 12 volt charger?

If you are asking the question, can you charge a 6 volt battery with a 12 volt charger, the answer is no.