Not sure about how many Watts your 36 volt charger uses, but you can find out by this formula... Volts X Amps = Watts.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
To determine the watts needed to run a 12-volt drill charger, you can use the formula: Watts = Volts x Amps. If you know the amperage of the charger, you can multiply it by 12 volts to find the wattage required.
No, you cannot charge a 28 volt aircraft battery with a 12 volt car charger. The charger voltage needs to match the battery voltage for safe and effective charging. Using a charger with a lower voltage can damage the battery and pose safety risks.
It is not recommended to charge a 6 volt battery with a 12 volt battery charger as it can damage the battery. The higher voltage can overcharge the battery and cause it to overheat. It is important to use the correct charger with the matching voltage to prevent damage to the battery.
It is not recommended to use a 12 volt charger to charge a 14.4 volt battery as the charger may not provide enough voltage to fully charge the battery. Using the correct voltage charger will ensure efficient and safe charging of the battery.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
No, an automobile battery charger outputs 12 Volts. This is far too many volts to charge a 5 Volt battery. You would destroy the 5 Volt battery with this charger.
You do not charge a 7.2 volt battery with a 9.6 volt charger period unless you want to ruin the battery. You charge it with a 7.2 volt charger.
No, you cannot charge an 8 volt battery with a 6 volt charger. The voltage of the charger must match the voltage of the battery.
Yes, an 18 volt charger can damage a 14 volt battery. This is because the wattage for the battery needs to be equal to the wattage of the charger.
No, a 12 volt charger will overcharge a 8 volt battery and destroy it.
To determine the watts needed to run a 12-volt drill charger, you can use the formula: Watts = Volts x Amps. If you know the amperage of the charger, you can multiply it by 12 volts to find the wattage required.
A 12 volt battery charger is designed to charge 12 volt batteries.The answer to the Related Question explains how any battery charger works.
If you are asking the question, can you charge a 6 volt battery with a 12 volt charger, the answer is no.
Yes, a 12 volt battery will be damaged if charged with a 24 volt charger.
The formula you are looking for is I = W/E. Amps = Watts/Volts. 300/24 = 12.5 amps. A good charger with an output of 15 amps will do the job nicely. The time that it will take to charge the battery will depend on the amp/hrs of the connected battery and the state of discharge that the battery is in when charging starts.
No, it will overcharge the 6 volt battery.