There is no direct conversion between lumens and watts as they measure different things. Lumens measure the total amount of visible light emitted by a source, while watts measure the amount of energy consumed or produced. The equivalence between lumens and watts depends on the type of light source (i.e., incandescent, LED, etc.) and their efficiency.
Incandescent bulbs give about 10 lumens of light per watt of electric power Halogens give about 13 lumens per watt CFLs give about 50 lumens per watt So it depends on the type of bulb.
220 lumens is equal to a tungsten incandescent light bulb of 15 watts. Halogen lamp 20 watts. Fluorescent lamp 60 watts. LED lamp 60 watts. high pressure sodium vapour lamp 117 watts. Mercury vapour lamp 50 watts or 17.32 candle power
Normally the watts is a measure of how many watts of electicity a bulb uses, so a 60 watt bulb uses 60 watts. The brightness is measured in lumens, so a 60-watt incandescent blub might produce 600 lumens while a high-efficiency fluorescent blub might produce 3000 lumens.
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
Watts are a unit of power. So 40 watts of power to an LED are the same as 40 watts of power to a fluorescent. Sometimes LEDs are rated in equivalent watts which is an attempt to relate watts to brightness or lumens. You need to compare lumens and the "temperature" of the bulbs in Kelvin to get the comparison I think you are looking for.
There is no direct conversion between lumens and watts for LEDs since they are measured differently. However, as a rough estimate, a 60-watt incandescent bulb produces about 800 lumens. For an equivalent LED output, you would typically need an LED bulb with around 800 lumens.
it depends, lumens measures light and watts measure power. check out this article; http://wiki.renderplus.com/?title=Lumens_vs_Watts
One lumen makes up 1 ANSI lumen as they both measure the same output of light. ANSI lumens are used exclusively for measuring the output of projectors.
The number of watts needed to produce 820 lumens depends on the type of light source. For traditional incandescent bulbs, it would be around 60-70 watts. However, for LED or CFL bulbs, it would be much lower, around 10-15 watts.
1000. K = kilo = 1000 W = watts
A 150-watt light bulb uses energy at the rate of 150 watts, when it's turned on.