There is no direct conversion between lumens and watts as they measure different things. Lumens measure the total amount of visible light emitted by a source, while watts measure the amount of energy consumed or produced. The equivalence between lumens and watts depends on the type of light source (i.e., incandescent, LED, etc.) and their efficiency.
A 42 watt CFL bulb typically produces around 2800 to 3100 lumens of light output.
Yes, 2.8 kVA is equal to 2800 watts. This is because 1 kVA is equivalent to 1000 watts, so 2.8 kVA would be 2800 watts.
There is no direct conversion between lumens and watts for LEDs since they are measured differently. However, as a rough estimate, a 60-watt incandescent bulb produces about 800 lumens. For an equivalent LED output, you would typically need an LED bulb with around 800 lumens.
A 150 watt halogen bulb will give off somewhere around 2000 lumens. These lights may give off up to about 2400 lumens.
it depends, lumens measures light and watts measure power. check out this article; http://wiki.renderplus.com/?title=Lumens_vs_Watts
A 42 watt CFL bulb typically produces around 2800 to 3100 lumens of light output.
A 150 watt bulb typically produces around 2600 to 2800 lumens.
2800 watts is approximately 9554 Btu.
A 150-watt light bulb typically produces around 2600-2800 lumens.
Yes, 2.8 kVA is equal to 2800 watts. This is because 1 kVA is equivalent to 1000 watts, so 2.8 kVA would be 2800 watts.
A light bulb with a power consumption of 150 watts typically produces around 2600 to 3000 lumens.
220 lumens is equal to a tungsten incandescent light bulb of 15 watts. Halogen lamp 20 watts. Fluorescent lamp 60 watts. LED lamp 60 watts. high pressure sodium vapour lamp 117 watts. Mercury vapour lamp 50 watts or 17.32 candle power
Normally the watts is a measure of how many watts of electicity a bulb uses, so a 60 watt bulb uses 60 watts. The brightness is measured in lumens, so a 60-watt incandescent blub might produce 600 lumens while a high-efficiency fluorescent blub might produce 3000 lumens.
Watts are a unit of power. So 40 watts of power to an LED are the same as 40 watts of power to a fluorescent. Sometimes LEDs are rated in equivalent watts which is an attempt to relate watts to brightness or lumens. You need to compare lumens and the "temperature" of the bulbs in Kelvin to get the comparison I think you are looking for.
There is no direct conversion between lumens and watts for LEDs since they are measured differently. However, as a rough estimate, a 60-watt incandescent bulb produces about 800 lumens. For an equivalent LED output, you would typically need an LED bulb with around 800 lumens.
A 150 watt halogen bulb will give off somewhere around 2000 lumens. These lights may give off up to about 2400 lumens.
it depends, lumens measures light and watts measure power. check out this article; http://wiki.renderplus.com/?title=Lumens_vs_Watts