The formula for watts is W = A x V. Your system would draw 660 watts to be used in any calculations to find out how much it costs to run the pump.
The power (in watts) can be calculated using the formula: Power (W) = Voltage (V) * Current (A). In this case, the power required to run the 3 amp well pump on 220 volts is 660 watts (220 V * 3 A = 660 W).
FIRST CHECK HOW MANY WATTS DOES ALL YOUR ELECTRICAL APPLIANCES CONSUME THEN DIVIDE IT by their respective volts you will get your required answer
There is no direct relationship between watts and volts. Watts = volts x current in amps.
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
There are no watts to generate volts!! There is a relation that is watts = volts * Amps Generators are set up to generate a specific voltage regardless or watts or amps capacity it has.
That depends on your router. The current draw of a router (or any other electrical device) can be calculated by: Amps * Volts = Watts If you know any two, you can calculate the third. If (for example) the router draws 750 Watts, and you know that it plugs into 120 Volts, then you can plug into the formula Amps *120 Volts = 750 Wats OR Amps = 750 Watts/120 Volts OR Amps = 6.25 If you would like the answer in volts it would then be about: 120
FIRST CHECK HOW MANY WATTS DOES ALL YOUR ELECTRICAL APPLIANCES CONSUME THEN DIVIDE IT by their respective volts you will get your required answer
Find the block heater and look for the nameplate on it. It will be in watts. Use the following equation to find the amperage that it draws. Amps = Watts/Volts. The voltage to use for the truck will be 12 volts.
Power = Volts * current [p = E*I]; 120volts*10amps = 1200watts
amps equals watts divided by volts.
volts times amps = watts
There is no direct relationship between watts and volts. Watts = volts x current in amps.
First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr
Watts and Volts are two distinct types of measurement.
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
Watts are a unit of power and Volts are a unit of electric potential, so they cannot be directly compared. However, Watts and Volts can be related byWatts = Volts * AmperesorWatts = (Volts^2) / Ohmswhere Amperes are a unit of current and Ohms are a unit of resistance. So, for example, if a lightbulb draws .333 Amps of current at 120 Volts, it is a 40 Watt bulb. (.333 A * 120 V = 40 W)
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
The power required is(6) times (the amperes of current the radio draws when it operates) watts.