answersLogoWhite

0

How many watts of motor are required for 30 kg material?

Updated: 8/21/2019
User Avatar

Wiki User

10y ago

Best Answer

If it's to lift 30 kg, it depends how far it is to be lifted and how quickly the lift takes to complete.

To lift 30 kg through 10 metres requires 30 x 9.8 x 10 joules of energy, that is 3000 Joules. To do that in 10 seconds needs 300 watts, which would be about half a horse power motor. To do it in 5 seconds the power would be 600 watts - a 1 horse power motor.

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many watts of motor are required for 30 kg material?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many watts of solar panels requires to run 15 hp electric motor?

36 No's of 300w solar modules required


How many watts does a freezer motor uses?

a freezer morter got 60 watts in it or 90 watts


How many watts required for an iron box?

FIRST CHECK HOW MANY WATTS DOES ALL YOUR ELECTRICAL APPLIANCES CONSUME THEN DIVIDE IT by their respective volts you will get your required answer


How many watts does a motor need to run for 30 minutes?

75 kw motor


How many watts to power a mini firdge?

Probably 100-200 watts but only when the pump motor is running.


How many watts are required to heat one gallon of water one degree?

2.4705 watts/hour


How many watts is a typical remote control car motor?

about 69


How many watts can be expected form a windshield wiper motor?

It should give you that information on the side of the motor


how many watts are required to run a craftsman 60,000 btu propane forced air heater?

The conversion factor of 1 BTU = 0.293 watts. So, 60,000 * 0.293 watts = 17,580 watts. 17580 watts are required to run a craftsman 60,000 btu propane forced air heater.


14 horsepower how many watts?

One HP equals 746 watts. So 4 HP = 2984 watts.


One horsepower equal how many watts?

Approximately 746 watts of usuable power are equivalent to 1 horsepower. A 1hp motor, under full load, will draw more than 746 watts due to the inherent losses in the motor itself.


How many watts are required to start a 7 HP 12 VDC motor you want to start the motor on solar panel?

For calculation purposes 1 HP is equal to 746 watts. So you have a total of 746 x 7 = 5222 watts. The amperage will be A = W/V = 7222/12 = 435 amps. You can not start the motor directly off of the solar panel. You would need a large 12 VDC parallel connected battery bank to obtain the amperage capacity to start the motor. The solar panels would be connected to the battery bank and used to charge the batteries after the start.