Want this question answered?
The intake air temperature sensor is located just after the top of the intercooler. It will have color coded wires coming from it.
mostly green
Hydrocarbons (organic substances) give Titan its orange color and also its possibility of harboring life.
You mean the MAP (Manifold Absolute Pressure) sensor. On the 3400 engine it is located on the top of the engine, behind the aluminum intake. Open the hood and look at the intake (stamped 3400). Directly behind is the MAP sensor. It has a small 1" hose connected directly to the intake, as well as a weatherpak connector. It is approximately 3" X 1" and is black in color. Someone should answer for the 3800 engine.
A really light gray. The color was created by space dust.
THE CAM POSITION SENSOR IS LOCATED ON THE DRIVERS SIDE. THE INTAKE MANIFOLD IS CUT OUT WHERE IT SITS ON TOP OF THE ENGINE BLOCK.IT IS BLACK IN COLOR AND HAS 2 5.5 MM SCREWS THAT YOU WILL BE ABLE TO SEE
yellow with a slight tint of orange.
What color wires at the maf sensor belong to the iat sensor?
WHAT ARE"89-NISSAN MAXIMA RADIO WIRE COLOR CODES
color codes for wiring on factory stereo on 2008 Nissan sentra?
The crank sensor is located on the lower part of the block on the driverside. It faces the front of the car and is held in by one Allen bolt. IT has a long lead(wire) that reaches up and plugs in under the intake manifold. It is a grey color connector.
The IAT sensor plug-in is located on top of the air intake right where the air filter is located. I am still trying to find out which color wires are the IAT sensor since the plug-in has 5 wires. If someone has a shop manual and can identify the right two wires, we will have this one licked. a and b are the iat sensor wires which are tan wires