It depends on the amp and what the amp is being used for and what kind of automotive it is.
By Voltage output and capacity in Amp hours.
a gmc battery can be from 500 to 1000 cracking amps. if you are using a 2 or 6 amp charger the 6 amp will charge faster than the 2 amp.
It takes a 35 amp blade type automotive fuse
A series circuit will produce more voltage. For example, two 12 volt automotive batteries both have a 600 amp capacity. Connect the 2 batteries in series and you will have 24 volts with 600 amp capacity. Connect the 2 batteries in parallel and you will have 12 volts with 1200 amp capacity.
To determine the horsepower required to drive a 100 amp alternator, you can use the formula: horsepower (HP) = (Voltage × Amperage) / 746. For a typical automotive system operating at 12 volts, the calculation would be (12V × 100A) / 746, which equals approximately 1.61 HP. This means that about 1.61 horsepower is needed to drive a 100 amp alternator effectively.
There are two ways to interpret this question. 1. No you can not use a 12 VDC coil on a 12 VAC source. 2. Check the voltage rating on the automotive relay. If it is approved for AC use then the relay will handle the 42 amps that the halogen lighting will draw. If the relay is not rated for AC use don't use it as the contact surfaces are not rated to handle the current.
An amp is the actual amp while an amp chord connects the instrument to the amp.
A 20 amp fuse typically has a cylindrical shape and is often made of glass or plastic. It usually features a metal end cap and a visible wire element inside that melts to break the circuit when overloaded. The fuse may be marked with "20A" or similar labeling to indicate its amperage rating. In automotive settings, a 20 amp blade fuse is often colored red for easy identification.
The F6AL250V fuse is a 6 amp fuse rated for a maximum voltage of 250 volts. The "F" indicates that it is a fast-acting fuse, designed to blow quickly to protect circuits from overloads. The "A" signifies that it is an automotive or similar type fuse. Always ensure that the fuse rating matches the specifications of the circuit it is intended to protect.
5 amp,10 amp, 15 amp, 20 amp, 25 amp, and 30 amp.
Automotive engineering is how the car will perform. Automotive design is what the car will look like.
A complete automotive probably refers to the complete automotive history or record.