0
What else can I help you with?
What is the viscosity of glycerol at room temperature?
From Wikipedia: The viscosity of water is 8.90 × 10−4 Pa·s or 8.90 × 10−3 dyn·s/cm2 or 0.890 cP at about 25 °C.
What is the density of kerosene at 20 degree C?
At one atmosphere pressure, and temperature of 60 degrees F, the density of kerosene is 817.15 Kg per cubic meter or 0.81715 Kg per Litre
What is the viscosity and density of stearic acid at 20 degree Celsius and 33 degree Celsius?
The viscosity of stearic acid at 20°C is about 120 mPa·s, and at 33°C it is approximately 78 mPa·s. The density of stearic acid at 20°C is around 0.847 g/cm³, and at 33°C it is about 0.843 g/cm³.
What is the specific gravity of kerosene at 20 degrees?
Kerosene has a specific gravity of 0.820 at 60 degrees Fahrenheit.
What is the melting point for kerosene?
-20 degrees centigrade.
Density and viscosity of air at room temperature?
@20 degree celsius, Dynamic Viscosity of air is 1.9137 kg/m/sec
What is Sodium sulfite solution viscosity at 20 degree Celsius temperature?
The viscosity of sodium sulfite solution at 20 degrees Celsius can vary depending on its concentration. Typically, sodium sulfite solutions have low to moderate viscosities at this temperature due to their liquid state. Additional factors such as the specific concentration and presence of impurities can also influence the viscosity of the solution.
What is actual viscosity of n-octadecane at twenty degree centigade?
at room temperature which is usully estimated at around 20-25 degress it is a solid. this is becasue of its loarger molar size.
Which oil has higher viscosity SAE 20 or SAE 40?
SAE 40 has a higher viscosity.
Which of oil has a higher viscosity. SAE 20 or SAE 40?
SAE 40 has a higher viscosity.
What is the refractive index of kerocine?
The refractive index of kerosene at 20°C is approximately 1.448.
Can you mix kerosene with home heating oil without harm to furnace or contaminating home heating oil?
Mixing kerosene with home heating oil is generally safe and commonly done to lower the viscosity of the oil for better burning. However, it's essential to ensure that both fuels are of similar quality and compatibility. Consult with a professional to determine the appropriate ratio to avoid any potential harm to your furnace or home heating system.
