Want this question answered?
well one gallon weighs approximately 8 pounds. so 5 percent of 898 gallons is 44.9 gallons. take 44.9 times 8 and you have 359.2 pounds.
tv=tv, so 0,25x50=0,1v; v=12,5/0,1; v=125ml of water. So the solution must have 125ml of water for the title to be 10%, then we must add 125-50ml(75ml) of water to it.
800 pounds of water would be 95.8 US gallons.
20 gallons of water weighs 167 pounds.
616 x 7.48 =4607.68
20% of 190 gallons of water= 20% * 190= 0.2 * 190= 38 gallons of water
70% of water, 326,000,000,000,000,000,000 gallons.
To clean Metal parts the normal ratio is 12 to 20 percent vs. gallons of water in your tank for better effect heat liquid to 140 degrees and higher but 140 to 160 degrees is the norm but I am currently using heated caustic at around 200 to 220 degrees with 35 horse powered motors with high pressure nozzles
well one gallon weighs approximately 8 pounds. so 5 percent of 898 gallons is 44.9 gallons. take 44.9 times 8 and you have 359.2 pounds.
To dilute 500 gallons of a 31% solution to a 15% solution you would add 533.33 gallons of the dilutant. For example, if you have 500 gallons of a 31% saline solution you would add 533.33 gallons of water to create 1033.33 gallons of a 15% saline solution.
55 gallons x .2 = 11 gallons.
96
106
A one percent solution means 1 part beach and 99 parts water. So we can answer the question by solving the equation 1 part bleach/99 parts water=x gallons bleach/20 gallons water. You can cross multiply. This is the same as 99x=20 so x=20/99 or .20 Let's check .20 gallons bleach/ 20 gallons water=.01 which is 1% .2 gallons is the same as 3.2 cups or 25.6 fluid oz.
First off do not use tap water. Use only distilled water. You will need to add 3 gallons of distilled water to the solution to get 60% antifreeze and 40% distilled water or a 60/40 mix.
14 gallons
I'm a chemist waste water operator and we use caustic soda to raise pH levels and sulfuric acid to lower pH levels