That depends entirely on your service. Look at the meterbase to your house; if the shutoff says "100A", you have 100 Amp service. If the shutoff says "125A" you have 125 Amp service... you get the idea.
Answer
Assuming (1) the load is balanced, and (2) 380 V is the line voltage (UL), then the line current (IL) is given by:
P = 1.732 UL IL x power factor
Since the power factor is unity, rearranging the equation, to make IL the subject:
IL = P/(1.732 UL) = 160 000 / (1.732 x 380) = 243 A (Answer)
The formula you are looking for is I = W/E. 6 kW = 6000 watts. Amps = Watts/Volts
There are zero amps in 220v 60Hz.
If your device uses 900 Watts at 7.5 Amps, then it requires 120 volts. If you want to use it where the supplied current is 220 volts, then you'll need a transformer - but only if the device can operate on 50 Hz. Most places that use 220 Volts supply it at 50 Hz. If your device says it can operate on 50 Hz you can use a transformer.
Hz means Hertz which is a measure of frequency. It was once just referred to as cycles per second. In the USA 60 Hz is the normal frequency for AC in a business or residence. It has nothing to do with the amperage per se.
we are looking to wire up diagram for a 45kw transformer from 220 volts to 440 volts 3 phase 60 Hz <<>> The formula you are looking for is KVA = Amps x Volts x 1.73/1000 = 118 x 380 x 1.73 = 77573/1000 = 77.5 KVA transformer. Your primary amperage will be 205 amps and the secondary amperage will be 118 amps.
There is no fixed connection between frequency (Hertz) and voltage, you can have 60 Hz at any voltage.
How about "volts"? I don't think "amperes" is what you had in mind.Here in America, we are resistant to change; period!We are the only large country that has not embraced the metric system. The entire world uses 50 Hz 220 Volt power except for in the USA and a few other places.
Yes, that system is what it is designed to operate on.
If your device uses 900 Watts at 7.5 Amps, then it requires 120 volts. If you want to use it where the supplied current is 220 volts, then you'll need a transformer - but only if the device can operate on 50 Hz. Most places that use 220 Volts supply it at 50 Hz. If your device says it can operate on 50 Hz you can use a transformer.
220 volts 60 Hz
Hz means Hertz which is a measure of frequency. It was once just referred to as cycles per second. In the USA 60 Hz is the normal frequency for AC in a business or residence. It has nothing to do with the amperage per se.
220 V @ 60 Hz. Source: voltageplugregion.com
No it would not.
Yes. It will work OK but run about 20% faster than the name plate indicates.
No, the Philippines uses 220 volts at 60 Hz.
Dubai uses 220 VAC at 50 Hz (in the USA, we use 120 VAC at 60 Hz). They also use the G type plug.
Standard US power is 110-120v at 60 hz. Heavy appliances are usually 220-240v at 50 hz.
Canada uses 120 or 240 volts at 60 hz. Egypt uses 220 or 380 at 50 hz.
i went onto whirlpool's site and checked a basic electric range for some specs.here's a cut and paste from there:Electrical Requirements15 Amps. 60 Hz. 120 V.