Want this question answered?
5.00
0.1 gallon of bleach, or 12.8 ounces (just over 1.5 cups)
Let's say about 30 gallons.
I would add only 1/4 of a gallon if the level is 0. Then check the level and add a little if needed.
You should never put bleach in water to keep it clean. You can not drink water with bleach and it and any other living thing in it will die.
One teaspoon of bleach is used to disinfect five gallons of water. Therefore, 105.6 teaspoons of bleach would be used to disinfect 528 gallons of water.
how much is a romen brown glass bieach bottle worth, its a gallon bottle with the cap is on
how much chlorine do I put for a 1,718 gallon pool
If it is mold, then yes, you could. The green is oxidation, the same as rust on steel and bleach won't do much of anything to remove it. It will not really hurt anything.
Just figure out what each word means. Lets talk about bleach (Chlorex) for example. Let's put some of it into a gallon container. How much should we put in? I say, ok, lets fill it half ways with the bleach. Lets finish up by filling the rest of the gallon container with water. Now lets talk about what we just did. We just added 50 percent of bleach to a gallon with water. That's the answer. We have the percent (50%) and we have the volume (one gallon). So we have talked about percent by volume. Hope that helps. In real life always add the bleach to the water, its safer.
It's a 1/32 ratio (2oz of bleach to 64oz of water), so it's 1/32 of 4, which would be about .125oz of bleach, or a little less than a teaspoon.
2 drops of Regular Clorox Bleach per quart of water 8 drops of Regular Clorox Bleach per gallon of water 1/2 teaspoon Regular Clorox Bleach per five gallons of water If water is cloudy, double the recommended dosages of Clorox Bleach. Only use Regular Clorox Bleach (not Fresh Scent or Lemon Fresh). To insure that Clorox Bleach is at its full strength, rotate or replace your storage bottle minimally every three months.