Soda ash (sodium carbonate), sold as pH Increaser, pH UP or Arm & Hammer Washing soda, will do the trick. You can also use borax, sold as 20 Mule Team Borax.
You can use soda ash (sodium carbonate), sold as pH Increaser, pH UP or Arm & Hammer Washing soda. You can also use borax, sold as 20 Mule Team Borax. Sodium bicarbonate, sold as baking soda, Alkalinity Increaser or Alk Up, will raise pool pH levels, but not very efficiently.
Yes, but it's not generally a good idea. Both will tend to raise your pH. If your pH is too low, add the borax first, to get it to at least 7.0. Then you can add baking soda, if you need to increase your alkalinity. BUT, you should check your alkalinity after you raise your pH -- it will be higher, and you may not need the baking soda.
Borax is an alkali. it has a pH of 9.2
The borax water solution is basic.
how to raise ph level from 6.2 to 7.4? Chlorine is 3.
Soda ash (sodium carbonate), sold as pH Increaser, pH UP or Arm & Hammer Washing soda, will do the trick. You can also use borax, sold as 20 Mule Team Borax.
You can use soda ash (sodium carbonate), sold as pH Increaser, pH UP or Arm & Hammer Washing soda. You can also use borax, sold as 20 Mule Team Borax. Sodium bicarbonate, sold as baking soda, Alkalinity Increaser or Alk Up, will raise pool pH levels, but not very efficiently.
The most commonly sold product for that purpose is sodium carbonate, aka soda ash, sold as Ph Up by pool stores and as "Washing Soda" by grocery stores.You can also use 20 Mule Team Borax Laundry Booster (sodium tetraborate). It can be found at many grocery stores. Try using the same amount as you would with PH plus 1 lb. to 10,000 gallons, and wait 2 to 4 hrs. Then check your PH reading. If it's still low, add some more until you get it to 7.2 to 7.8 range.Caution - check your alkalinity before using borax, because borax raises PH only, without affecting your alkalinity much. If your alkalinity is also low you can use baking soda (sodium bicarbonate) to raise your alkalinity and PH. Baking Soda raises PH and Alkalinity at the same time. Baking Soda has the same ingredients as Alkalinity plus, but half the price. Take a look at this web site for more information on Borax: www.poolsolutions.com/gd/borax_20mule.html
Yes, but it's not generally a good idea. Both will tend to raise your pH. If your pH is too low, add the borax first, to get it to at least 7.0. Then you can add baking soda, if you need to increase your alkalinity. BUT, you should check your alkalinity after you raise your pH -- it will be higher, and you may not need the baking soda.
Borax is an alkali. it has a pH of 9.2
The borax water solution is basic.
9.3
Initially, you can't. What you do to lower alkalinity is first lower the pH to under 7.2, but not lower than 6.9. Then you aerate the pool, by creating bubbles with your brush, or by running a water feature, if you have one. This will lower your alkalinity. Maintain this lower pH and aerating until you get your alkalinity where you want it. Then retest your pH. If it is now too low, you add Mule Team Borax, say a 1/4 a cup, and then retest. The borax will raise your pH without raising your alkalinity. See the poolforum.com for more help if needed.
Only use 20 Mule Team Borax without detergent. This raises your PH without raisig alkalinity. Try using the same amount you would with PH plus, and wait 2 to 4 hrs. and check your PH reading. If your alkalinity is low you can use baking soda to raise your alkalinity. Baking Soda raises PH and Alkalinity. Baking Soda has the same ingredients as Alkalinity plus, but half the price. Take a look at this web site for more information on Borax. http://www.poolsolutions.com/gd/borax_20mule.html TS
The amount of NaOH needed to raise the pH from 8 to 10 depends heavily on the conditions. The amount of NaOH needed will increase as the volume of the solution increases. Even more importantly, buffers can stabilize the pH significantly. If buffers are presently, the pH change will be much more gradual, and more NaOH will be required.
about 9.5 9.28