Average Temperature The average temperature is 68 degrees Fahrenheit.
The temperature of three different constructs of clay won't vary according to the shape of the construct. If the clay is at room temerature, the shapes will be at room temperature with possibly some very small variation from the hands of the person working the clay.
This depends on he melting temperature of the wire that you are using. It also depends on the firing temperature of the clay. If the melting temperature of the wire is higher than the firing temperature of the clay, then wire can be added to a clay piece.
solid
the cylinders were rolled over clay to leave an imprint. if this is for school you r a bitcc
Clay pot cooking requires the temperature to be set higher than 450 degrees Fahrenheit. GE Advantium ovens stop at that heat setting. Baking ceramics with specialized paints are able to be done in a home oven.
Any temperature but for best results in a hot spot or freezing spot. Make sure you don't freeze the clay, burn it or crack it. Certain clays have to be at certain temperatures. All clay s different.
Do you mean clay triangle? This is used in the Chemistry Laboratory for holding a clay crucible when heating substances to high temperature to melt them.
they are made from clay that are heated in a high temperature room...
you leave it out in room temperature overnight
My answer goes for Polymer Clay: You cook it IN AN OVEN for 15 mins per quarter of an inch of thickness (How thick the clay is) at 275F. That's if you are using Sculpey. I think all clays made by Sculpey are baked at the same temperature for the same amount of time, but I'm not sure. Also when you buy your clay look at the instructions. It will tell you how to bake it. DO NOT PUT IN MICROWAVE!! It will become soft and lumpy then turn super hard.
In the "Kilning" and "bisquing" processes, the moist clay loses water (Evaporates). The water makes up about 5-10 % of the clays' substance, thus, on average, clay shrinks about 15-20% after it is in its final finished stage.
Just about everything melts or combusts at high enough temperature. If clay is fired at the correct temperature for the type clay then it's called maturing the clay. It's like baking a cake. It's not batter anymore and it can't be made back into batter. Properly fired clay won't break down into mud again. The chemical nature is changed. The particles of clay melt enough to bond them together then the pot is usually glazed and fired to an even higher temperature to melt the glass like glaze and bond it to the surface of the clay pot. Exact temperature is very important. Too little and you get an ugly pot with glaze that cracks off and too high and it can be a melted, warped mess.