A ton of dirt is typically about 1 cubic yard in volume, which is equivalent to 27 cubic feet. This can vary depending on the density and moisture content of the dirt.
A half ton truck can typically haul around 1 to 1.5 cubic yards of dirt, depending on the specific make and model of the truck. It's important to note that weight capacity and volume capacity are not the same, so it's best to check the truck's specifications for an accurate amount.
The weight of dirt can vary depending on the type of dirt, but on average, 1 cubic yard of dirt weighs about 2,000 pounds. Therefore, 2.5 yards of dirt would weigh approximately 5,000 pounds or 2.5 tons.
There is no dirt in a hole because a hole is defined by the absence of material, in this case dirt. If you were to fill the hole with dirt, it would require 24 cubic feet of dirt to completely fill it.
The price of a ton of paper can vary widely depending on factors such as the type of paper, quality, and market conditions. On average, the price can range from $200 to $800 per ton for standard office paper, while specialty papers or higher-quality paper may cost more.
A yard of dry dirt typically weighs between 2,000 to 2,700 pounds, depending on its moisture content and composition.
1 ton is 32,000 ounces.
More than you can get into your pockets How about a ton?.
Insufficient information for anyone to answer it.
2000 pounds of Cardboard.
A one ton pile of dirt would be approximately 3 feet high, assuming the dirt has an average density of about 1.5 tons per cubic yard.
On average, there are about 0.83 cubic yards of dirt in a ton, which is equivalent to roughly 22 cubic feet. This can vary depending on the density of the dirt and how tightly it is packed.
1 ton is 2,240 pounds (UK), in the US it's 2,000. So that would be 2,240 (UK)/2,000 (US) pounds of dirt.
It all depends on how big the truck is. For example a dump truck having two rear axles is rated and usually can transport 18 yards of dirt. 1/2-3/4 and 1 ton are rated for just that 1/2-3/4 and 1 ton.
1 yard of dirt = 1.45 tons of dirt The above is a function guideline, but it really depends on the type of dirt in question, and how wet that dirt is. For baseball dirt I like to use 1 yard = 1.3 tons
It is 907.18 kg in a short ton.
A ton!
As much as the dirt that is there.