0
What else can I help you with?
How much does the earth weigh in mass tons?
The Earth's mass is approximately 5.97 × 10^24 kilograms, which is equivalent to about 6.6 × 10^21 metric tons.
How much does 3 cubic yards of topsoil with a density of 125 pounds per cubic foot equal to in weight given in tons?
1 cubic yard is 27 cubic feet, so 3 cubic yards is 81 cubic feet. At 125 lb per cubic foot, that much topsoil would weigh 10,125 lb. At 2000 lb per ton, that converts to 5.0625 tons (if we assume complete precision of all the numbers - if not, then we would be limited to 1 digit of precision because the 3 in 3 cubic yards is only precise to 1 digit. In that case we would have to round the answer off to be 5 tons)
How much does your Earth weigh in metric tons?
The Earth's mass is approximately 5.97 x 10^24 kilograms, which is equivalent to about 5.97 x 10^21 metric tons.
1 cubic yard of dirt is equal to how many tons?
Depends on the type of dirt you are talking about and the water content, but as a guide between 1300 and 1600lbs
How much does a cubic yard of crushed lava rock weigh?
A cubic yard of crushed lava rock typically weighs around 2,750 pounds (1.375 tons).
How many tons of dirt are in 27000 yards?
To convert cubic yards of dirt to tons, you need to know the density of the dirt, which typically ranges from 1.5 to 2 tons per cubic yard. Assuming an average density of 1.5 tons per cubic yard, 27,000 cubic yards of dirt would weigh approximately 40,500 tons. If using a density of 2 tons per cubic yard, it would weigh around 54,000 tons. The exact weight will depend on the specific type of dirt.
How much does six yards of dirt weigh?
The weight of six yards of dirt can vary depending on its moisture content and composition, but a general estimate is around 1.5 tons per cubic yard. Therefore, six yards of dirt would weigh approximately 9 tons. It's important to note that this is a rough estimate and actual weight may differ based on the specific type of dirt and its moisture level.
How much does 28 cy yards of concrete weigh?
A yard of concrete weighs two tons, so 28 yards is 56 tons.
How many cubic yards are in 350 tons dirt?
To convert tons of dirt to cubic yards, you typically use an average weight factor for dirt, which is about 1.5 tons per cubic yard. Therefore, 350 tons of dirt would be approximately 233.33 cubic yards (350 tons ÷ 1.5 tons/cubic yard). Keep in mind that this can vary based on the type and moisture content of the dirt.
How do you convert 3 tons of gravel and 3 tons of dirt to yards?
dont no
How much dirt is 18 tons?
36,000 pounds, aprox 20 cubic yds. 20 cubic yards spread out at 2 inches will cover 3200 square feet. hope that helps.
How much area would 20 tons of dirt fill?
The area that 20 tons of dirt would fill depends on the depth of the dirt layer. On average, one ton of dirt occupies about 0.5 cubic yards. Therefore, 20 tons would be approximately 10 cubic yards. If you spread this over an area, for example, a depth of 1 foot, it would cover about 80 square feet. However, this can vary significantly based on the type and density of the dirt.
How many yards of dirt equal one ton of dirt?
1 yard of dirt = 1.45 tons of dirt The above is a function guideline, but it really depends on the type of dirt in question, and how wet that dirt is. For baseball dirt I like to use 1 yard = 1.3 tons
How many cubic yards of dirt does a tandem axle dump truck hold?
17 tons
How much tons does a brachiosaurus weigh?
3 tons
How many tons are in 8 yards of dirt?
11 cubic yards of planting mix converted to how many tons?
How much does 50 tons weigh?
50 tons weighs 50 tons.
