0
To convert tons of dirt to cubic yards, you typically use an average weight factor for dirt, which is about 1.5 tons per cubic yard. Therefore, 350 tons of dirt would be approximately 233.33 cubic yards (350 tons ÷ 1.5 tons/cubic yard). Keep in mind that this can vary based on the type and moisture content of the dirt.
What else can I help you with?
How many tons of dirt are in 27000 yards?
To convert cubic yards of dirt to tons, you need to know the density of the dirt, which typically ranges from 1.5 to 2 tons per cubic yard. Assuming an average density of 1.5 tons per cubic yard, 27,000 cubic yards of dirt would weigh approximately 40,500 tons. If using a density of 2 tons per cubic yard, it would weigh around 54,000 tons. The exact weight will depend on the specific type of dirt.
How many cubic yards of dirt does a tandem axle dump truck hold?
17 tons
How many tons are in 8 yards of dirt?
11 cubic yards of planting mix converted to how many tons?
How much dirt is 18 tons?
36,000 pounds, aprox 20 cubic yds. 20 cubic yards spread out at 2 inches will cover 3200 square feet. hope that helps.
How much in tons does 2.5 yards of dirt weigh?
The weight of dirt can vary depending on the type of dirt, but on average, 1 cubic yard of dirt weighs about 2,000 pounds. Therefore, 2.5 yards of dirt would weigh approximately 5,000 pounds or 2.5 tons.
How many cubic yards of small rock are in 22.50 tons?
there is about 1.25 yards to a ton,so 22.5 tons would be approx 18 yards
How many cubic yards in 16 tons of gravel?
16 tons of dry sand occupies approximately 320 cubic feet of volume.
How many cubic yards in 15 tons?
Yards is a measurement of distance - Tons is a measurement of weight - the two are not interchangeable.
How much area would 20 tons of dirt fill?
The area that 20 tons of dirt would fill depends on the depth of the dirt layer. On average, one ton of dirt occupies about 0.5 cubic yards. Therefore, 20 tons would be approximately 10 cubic yards. If you spread this over an area, for example, a depth of 1 foot, it would cover about 80 square feet. However, this can vary significantly based on the type and density of the dirt.
How do you convert cubic yards in to tons?
You don't. Cubic yards is volume while yards is distance.
How many tons of 21a stone is in 15 cubic yards?
22.5
Convert 9800 cubic yards of sand to tons?
To convert cubic yards of sand to tons, you can use the following formula: 1 cubic yard of sand is approximately equal to 1.35 tons. Therefore, 9800 cubic yards of sand would be approximately equal to 9800 * 1.35 = 13230 tons.
