To convert cubic yards of dirt to tons, you need to know the density of the dirt, which typically ranges from 1.5 to 2 tons per cubic yard. Assuming an average density of 1.5 tons per cubic yard, 27,000 cubic yards of dirt would weigh approximately 40,500 tons. If using a density of 2 tons per cubic yard, it would weigh around 54,000 tons. The exact weight will depend on the specific type of dirt.
11 cubic yards of planting mix converted to how many tons?
Yards can't be converted to tons. Yards measure length, while tons measure mass.
36,000 pounds, aprox 20 cubic yds. 20 cubic yards spread out at 2 inches will cover 3200 square feet. hope that helps.
Yards can't be converted to metric tons. Yards measure length, while metric tons measure mass.
To convert tons to yards, you would need to know the specific material and its density. The conversion factor will vary depending on the material. Without this information, it is not possible to accurately convert tons to yards.
dont no
17 tons
13.5 tons is equal to 27,000 pounds.
1 yard of dirt = 1.45 tons of dirt The above is a function guideline, but it really depends on the type of dirt in question, and how wet that dirt is. For baseball dirt I like to use 1 yard = 1.3 tons
The weight of dirt can vary depending on the type of dirt, but on average, 1 cubic yard of dirt weighs about 2,000 pounds. Therefore, 2.5 yards of dirt would weigh approximately 5,000 pounds or 2.5 tons.
2700 tons America = 2410.7143 ton England = 5400000 pounds
11 cubic yards of planting mix converted to how many tons?
Yards can't be converted to tons. Yards measure length, while tons measure mass.
36,000 pounds, aprox 20 cubic yds. 20 cubic yards spread out at 2 inches will cover 3200 square feet. hope that helps.
The weight of six yards of dirt can vary depending on its moisture content and composition, but a general estimate is around 1.5 tons per cubic yard. Therefore, six yards of dirt would weigh approximately 9 tons. It's important to note that this is a rough estimate and actual weight may differ based on the specific type of dirt and its moisture level.
The area that 20 tons of dirt would fill depends on the depth of the dirt layer. On average, one ton of dirt occupies about 0.5 cubic yards. Therefore, 20 tons would be approximately 10 cubic yards. If you spread this over an area, for example, a depth of 1 foot, it would cover about 80 square feet. However, this can vary significantly based on the type and density of the dirt.
there is about 1.25 yards to a ton,so 22.5 tons would be approx 18 yards