Depends if it is a shop, or if you are doing it. If you are going to a shop it will be around $65 for the first axle and $35 for others. If you do it at home you are looking at about $15 to $35 an axle depeding on what size bearing you have. Always be sure that you or the shop you are going to replaces the race ways and properly packs the bearing before install.
The bearings of a 1984 Mallard travel trailer can be greased by jacking up the trailer and removing the wheel hubs to access the wheel bearings. Pack the bearings with the proper grease and replace the wheel hubs and tires.
how to replace wheel bearings on 2004 GMC envoy?
how do you replace rear wheel bearings on nissan pulsar
Jack it up, remove the wheel, pry off the center cap, remove the cotter pin and nut, then pull the bearings out with the hub. Note that some trailer bearings are sealed and replaced as an entire unit.
How do you replace the front wheel bearings on a nissan frontier 4x4 1999
How do you change the wheel bearings on a Chevrolet aveo 2005
Front wheel bearings on a 4 wheel drive Explorer are not serviceable, replace them.
lube the whell bearings once a year is usually all that is needed
In order to replace a wheel bearing, the tire must first be removed on a Volvo v50. The wheel cowling can be removed exposing the bearings. After taking the bearings out, clean the housing and repack the bearings.
I recently did this for my 2004. I found it was cheaper to replace the entire wheel hub then to buy the bearings. The bonus is the new wheel hub comes with the bearings already to go.
The year, make and front or rear wheel bearings info would help.
Wheel bearings? 4X4 ? 4X2?