A device rated at 1000 watts consumes 1000 joules per second.
Simply divide energy by the time. Answer is in Watts.
It is equal to 4.5 joules per second. "Watt" means how quickly energy is generated, consumed, or converted.
. . runs at a constant 60 watts of electric power. In an hour it uses up 60 watt-hours of energy.
No, the rating of the transformer, in watts, is the maximum amount of energy that can be safely drawn from the device. Any wattage load up to that limit is safe to connect as long as the voltage is correct to the load.
if the question is how many watts consumed then under normal circumstaces 15volts time 6amps will give you 90 watts.
Generators are rated in watts because watts are the scale on which energy is measured.
Watts is a unit of power, energy / time. Therefore, the energy consumption of a device is the amount of watts, multiplied by the time the device is turned on.
Simply divide energy by the time. Answer is in Watts.
Yes, very easily. Receptacles and other electrical devices are rated in amperage that the device can use or handle. Take that amperage and multiply it by the voltage that the device is rated for. The answer will be in watts. This wattage will be the maximum that is allowed from the receptacle or any other device.
One of Kierchieff's laws tell us that the more wattage (energy) consumed by an electrical device in a circuit, the larger the voltage difference that exists across the device and the greater the current flowing through it. The energy consumed is directly proportional to the Impedance of the electrical device but is more importantly proportional to the square of the current. WATTS=VOLTS X AMPERES= RESISTANCE (IMPEDANCE) X AMPERES X AMPERES A Circuit with Current but without resistance would exhibit no energy at all.
The formula for watts is W = I x E. Watts = Amps x Volts.
A modern LCD screen in sleep mode consumes less than 2 watts. When in use, my 19" device consumes 150 watts according to the tag on the back.
They come in different sizes, and power ratings. Look at your dryer; somewhere it should have electrical specifications. These should either include a power (in watts), or volts and amperes separately. If volts and amperes are listed separately, multiplying them gives you a good idea of the amount of watts consumed. Note: watt is a unit of power, not of energy. You need to multiply that by the time you use the device, to get energy: joules = watts x seconds
Power in electricity is the rate at which electrical energy(E) is produced or consumed in a given time(t). Is measured in watts(W).
It is equal to 4.5 joules per second. "Watt" means how quickly energy is generated, consumed, or converted.
A power saving light is also known as a Compact Fluorescent Lamp (CFL).A typical CFL is rated at about nine (9) to thirteen (13) Watts, and the energy consumed by each is 0.009 kW and 0.013 kW respectively.
watts