Approximately nine, if be on right side. If be left then less. Much gallon be on right not much be on left. Membrane for other don't water proof, membrane for one be nine but six.
Basically you need a waterproofing paint. Zinnser makes one of the more famous in it's Watertite line of paints. They cost close to 30$ per gallon so it could be quite expensive.
Do you mean a 'gallon jug' of water? If so, it is to give strength to the material of the jug.
It depends on the specific gravity of the solution which in turn depends on the concentration of caustic material (gm/lire) and type of caustic material.
The weight of 1 gallon of tack coat material can vary depending on the specific product and its density. However, on average, 1 gallon of tack coat material can weigh around 8 to 9 pounds.
Gallon of what material density. Gallon is a volume unit while ounce is a mass unit.
An Imperial gallon is a British imperial capacity measure (liquid or dry) equal to 4 quarts or 4.545 liters.
1 US gallon is 3.785 litres, -so about 1/4 litre to a gallon.
depends on what kind of material your using and how your applying it. but for typical latex paint applied with a roller coverage is between 350 and 400 sq ft per gallon. so for a general answer between 4,725,000 and 5,400,000 sq ft
depends if there's anything in it and the material it's made out of
The average price of a 1000 gallon septic tank is around 1,500 to 4,000, depending on the material and brand.
1.43 units.
It depends what solid.If the solid is styrofoam, probably less than 1 pound.If the solid is ice, then about 7 pounds.If the solid is lead, stone, or gold, then many more pounds.