Want this question answered?
the boiling point of isopropyl alcohol is 82.5 degrees celsius or 355.5 K
Before rubbing alcohol absorbs, it is a liquid. While it absorbs (heat), the phase change occurring is evaporation. As the alcohol takes in heat, it turns into a gas.
Your skin warms the alcohol and it evaporates. To evaporate, a liquid needs extra energy to turn the liquid into a gas. This is called latent heat of evaporation. The only source of this latent heat is your skin, so evaporation takes heat out of the skin. This is just how sweating cools you down but alcohol has a lower boiling point than the water in sweat and so evaporation takes place more quickly with the alcohol. If you try to cool a patient with a fever, use a cloth soaked in warm water (not cold) as it will evaporate more quickly and so cool more effectively.
For evaporation to take place there must be some form of heat. This is heat from the sun
The cause of evaporation is the absorption of heat from the environment.
heat of vaporization for isopropyl alc is 159 cal/grams
In condensation heat is removed In evaporation heat is added
isopropyl alcohol
the boiling point of isopropyl alcohol is 82.5 degrees celsius or 355.5 K
heat energy
No. Its evaporation uses heat energy and causes it to cool.
It is called the Opposite of Condensation - that is Evaporation.
Heat is absorbed by the molecules leaving the place the evaporation is occuring. That is why, after putting aftershave or cologne, you feel cold. The alcohol in the aftershave/cologne has evaporated and taken the heat from your face with it.
Before rubbing alcohol absorbs, it is a liquid. While it absorbs (heat), the phase change occurring is evaporation. As the alcohol takes in heat, it turns into a gas.
It is important to heat treat in vacuum as otherwise lots of oxides form; after heat treat in vacuum oxides are removed, if part small enough, by use of an abrasive grit pad, such as Scothbrite A, and cleaned with acetone followed by isopropyl alcohol. If not protected, however, oxides will continue to form in air
Ch3-c(ch3)-o-c=och2-ch3
Clean the CPU and the base of the heat sink with isopropyl alcohol before applying the thermal compound.