How much hp does a 1980 c10 350 have?
Advertised horsepower is: 175 HP @ 4000 RPMs. That's not much. Straight out of the BOOK.
Advertised horsepower is 165 HP @ 3800 RPMs.
HP on the 305's range from 190-mid 200's to the crank.
160 hp @ 4200 rpms
190 hp (142 kW)
300 hp is not alot of power keep your foot out of the gas and your milage should not be to bad.
Z-28 - LG4 305 V8 165 hp (sold in California only) Z-28 - 350 (4bbl) V8 175 hp
210 hp. 210 hp.
165 HP @ 3800 RPMS
ADVERTISED HP. from factory. The 350 TRUCK engine has: 165 HP. @ 3800 RPMs.
Around 155-160 hp
factory HP in pre-1988 - - around 280-300 HP depending on carb. Nascars 350's - - over 850 HP.... if you've got the cash.
not as much as a dodge ram 3500 so about 350 hp haha. ford sux.
From the factory, they ranged from 145 hp to 370 hp.
Advertised horsepower is--165 HP @ 3800 RPMs.
Advertised Horsepower is 165 HP @ 3800 RPMs.
That depends on the year and what it was in. There all different HP.
Advertised HorsePower is: 165 HP @ 3800 RPMs.
i have a 350 engine how much hp 1996 10066036
250 to 350 hp depending on what model
Stock HP is only about 200 chiefy98clg at yahoo dot com
200 to 350 hp
Around 200 hp
350 hp double hump head are high compression ,if you are building it ,then you will have to make sure that squish/quench area is around .040 ,if not ,you will have detonation. Also header will be a requirement to get this HP
There's no way to answer that, but putting 305 heads on a 350 would increase compression ratio by about 1 point, which usually increases hp by about 20.
Mostly depends on how much $ you're willing to spend
230 hp, or 240 hp with the dual-cat option
260 hp @ 5000 rpm 330 tq @ 2400 rpm
a 350 will produce around 250 hp, and a 305 about 200 hp
You can purchase a new GM 350 that puts out 350 hp for $4056. If you want to build the same thing yourself, you could go to a GM warehousing distributor to find what parts were used for those results.
210 HP- 285 HP LS1 Engine 300 HP SS and Police setup
350 hp 350 hp
We need the year of the T/A to tell you.
The 350ci Small-Block V8 in the Buick Skylark could have anywhere from 140-260 hp.
I had one with 10:1 compression that was making close to 350 hp with decent heads.
My 350 crate motor from GM was 210 hp.
Base 305 4bbl (170 hp), optional 305 TPI (215 hp) or 350 TPI (225 hp)
Advertised Horsepower 1977 350 4-barrel is---165 HP @ 3800 RPMs. ......................................1986 350 4- barrel is---165 HP @ 3800 RPMs The other one for California is 155 @ 4000 RPMs.
235 HP for Z28, 240 HP for the IROC. The are the factory specs, and the engines are TPI.
408 and it really cant handle that
The basic 350 has around 170 hp.
depending...180 to 220 stock
165 HP at 3800 RPMS.
Stock 5.7L\350 should be approx. 210 HP and 230 Ft. lb torque
How much hp should I get out of my Chevy 350 bored .040 with six inch rods shaved block and heads. I'm running a 500 500 lift cam with 106 degrees of lobe separation
Check the engine code in the VIN. It is the letter in the 5th position from the left. M - 350 cu. in. 150 hp N - 350 cu. in. 175 hp R - 400 cu. in. 170 hp S - 400 cu. in. 200 hp T - 400 cu. in. 230 hp
There is 746 watts per HP. So a 350 hp motor with a power factor of roughly 0.8 would require 261,000 W 261KW generator or 326 KVA.
Well the raptor 350 is basically the same quad as the warrior 350 with different plastics but newer version. it has the same frame motor/trans. the warrior makes 21 hp so i think the raptor has 21 hp.
345 hp stock if you change to a carb you could gain 25 to 50 hp
Base engine - 165 hp (123 kW) L82 - 205 hp (153 kW)