The Epson 69 High Capacity Black Ink Cartridge holds 13 ml of ink.
You can print from 245-370 pages with the Epson 69 High Capacity Black Ink Cartridge.
The Epson 69 High Capacity Black Ink Cartridge has a 36 month shelf life.
The Canon PG-50 is a FINE black high capacity ink cartridge for canon photo printers. It is an OEM ink tank printer cartridge that comes in Black and Color.
98 is for high capacity. 99 is standard capacity. get more ink with 98
The Canon CL51 ink cartridge does come in colored ink. The complete name of this model is actually Canon CL51 High Capacity Color Ink Cartridge and is quite suitable for printing photos.
The 16 cartridge is considered the high capacity cartridge and the 17 gives you less ink
The type of ink one should find and purchase for the Epson T5846 printer, should be a ink-case that is compatible with the printer Epson T5846. One can find the ink at several online dealers for an example Amazon.
Lexmark 16 (black) and 26 (colour) are high capacity, while 17 and 27 are low-capacity.
"HP has an XL series of ink cartridge, that has capability of producing 750 pages. These high yield black ink cartridges will help prolong intervals between ink purchases."
You can of course get both color and black ink, but all inks also come in normal or high-capacity. Consider how much you use. If you're printing photos consider getting photo ink.
Sony High Definition Projectors will have been audio and picture than the Epson.
1. Look at the end of the cartridge for a plastic ball the is plugging up the filling hole. 2. Stand the cartridge on end where the plastic ball is facing up. 3. Put the "L" tool on top of the plastic filling hole ball and tap it with a hammer to knock the plastic ball into the cartridge. 4. Put the blunt needle onto the syringe and fill the syringe with ink. Black Cartridge will hold 20ml of ink, High Capacity Black cartridge holds 40ml. Color Cartridge will hold 10ml of ink, High Capacity Color cartridge holds 20ml. 5. Seal the filling hole with the rubber ball included with your refilling kit, by putting the rubber ball on top of the filling hole and press the rubber ball with the "L" tool until you feel it snap into place. Note: On your second refill you do not need to knock the ball into the cartridge. Just screw the ball remover half way into the rubber ball and pull it out. If you did not tear up the rubber ball you can use it again to seal the hole.