bout $ 4.50 per sq ft of gravel and 3 inches of hot mix.
Mix equal amount of CSS-1 emulsified asphalt with water at 30 degrees Celsius and after 15 minutes spray at 0.2 l/m2 at the surface prepared.
250 per ton
About $ 2.25 per sq ft for 3 inches of recycled asphalt.
About $ 4.50 per sq ft of gravel and 3 inches of hot mix. On average it cost $1 per sq.ft per inch of asphalt, just to lay it. If you are laying 3 inches of asphalt then expect it to cost around $3 per sq ft. If you lay 4 inches expect to pay 4 $ per sq.ft.. You only pay more when you have Base work to be done such as digging down 12 inches and then laying 9 inches of gravel and then the asphalt. In cases were there is Base work to be done expect to pay anywhere from 1.50 to 2 dollars a sq ft.
1.80$ per sqft
Calculate the volume of mix needed by multiplying 20x20x9. This gives cubic inches. Then divide that answer by 144 cubic inches per cubic foot, and you have the volume in cubic feet. A cubic foot of asphalt is a different weight depending on the weight of the rock in contains, but let's 158 pound of asphalt hotmix per cubic foot. Multiply the volume in cubic feet, above, by 158lbs, and you have the weight of mix per 20x20x9. Divide the answer by 2000 to convert to tons. Divide the tonnage by the weight per cubic feet calculated above in the second paragraph.
400 sq ft 54 sq ft per ton @ 3" 400/54=7.4 tons
For existing asphalt, $5 to $7 per square foot, depending on size of the job, complexity, etc.
$2.00 per square foot-residential
$2.25 per square foot usually
The average installation price of an asphalt driveway in CT is around $3-$5 per square foot. However, prices can vary based on factors such as the size of the driveway, site conditions, and additional services needed. It is recommended to get quotes from multiple contractors to ensure an accurate estimate for your specific project.