3315.555556ºC It is my understanding that an acetylene torch produces a flame temperature of approx. 6000 degrees Fahrenheit.
The oxyacetylene flame has a temperature of 3 480 oC.
An oxyacetylene flame is a type of hot, precise flame created by combining oxygen and acetylene gases in a welding torch. This flame is commonly used in metal cutting, welding, and brazing applications due to its high temperature and ability to produce a concentrated heat source.
You light the acetylene first, then you add oxygen.
An oxyacetylene torch typically burns at a temperature of around 3,500 degrees Celsius (6,332 degrees Fahrenheit) when both oxygen and acetylene are mixed and ignited.
During oxyacetylene gas welding, acetylene gas and oxygen are mixed in a torch and ignited to produce a high-temperature flame. The heat from this flame melts the metal being welded, while the oxygen assists in the combustion process by providing additional heat and reacting with the metal to form an oxide layer that is then removed as slag.
No, a clinical thermometer is not suitable for measuring the temperature of a candle flame. Candle flames burn at temperatures much higher than the range typically measured by a clinical thermometer. To measure the temperature of a candle flame, a specialized high-temperature thermometer or pyrometer would be more appropriate.
Be very careful with that set oxyacetylene tanks. I'm getting ready to do some oxyacetylene welding.
Acetylene is a flamable gas but while burning alone will not produce enough heat. Therefore, bringing in oxegen into the party raises the temperature of the flame. After the welder retains the proper ratio of Acetylene and oxegen, which is 1:1, the welder can start to heat the work piece til he/she forms a weld puddle and can use a filler rod to fuse two or more pieces of like metals together. Much more than just this but I believe I have the jest of it.
We cannot use a clinical thermometer to measure temperature of a candle flame because then the mercury will expand too much and the thermometer will explode.
No, quartz has a high melting point of 1670 degrees Celsius, which is much higher than the temperature reached by an oxyacetylene torch. It would require a specialized furnace or equipment to melt quartz.
The weakest flame is typically a low-temperature flame, such as a candle flame or a match flame. These flames produce less heat and energy compared to higher temperature flames like those of a blowtorch.
It is recommended to use at least a Grade 5 lens filter when performing oxyacetylene flame cutting. This will provide adequate protection against the intense ultraviolet and infrared radiation emitted during the cutting process. Additional layers of protection such as safety goggles or a face shield may also be necessary depending on the specific cutting operation.