0
What else can I help you with?
What new type of power connector was introduced with PCIe version2.0 how much power does this connector provide?
8-pin power supply connector with 150 watts
What new type of power connector was introduced with pcie version 2.0 how much power does this connector provide?
8-pin power connector and 300 watts
1 What new type of power connector was introduced with PCIe Version 2.0 and How much power does this connector provide?
8-pin power supply connector, 150watts
How much power does power connector with PCIe Version 2.0 provide?
75 watts
How much power does the power connector on the motherboard introduced with PCIe Version 2.0 provide?
300 watts
How much power does a 8-pin power supply connector provide?
300 watts
How much power does the 6 pin connector have?
75 Watts
What new type of power connector was introduced with PCIe Version 2.0 and how much power does the connector provide?
a PVc pipe about 2yds long and a nebulizer of 2 wats
Does computer supply takes main power and transforms it to the voltages?
Your power supply unit, PSU. Takes AC power and distributes so much power to each connector. Each PSU, depending on the wattage of the unit gives each connector so much voltage. Each connector is designed for a certain piece of hardware that requires different voltage.
How much power does a 4 pin peripheral power connector provide?
A 4-pin peripheral power connector, commonly known as a Molex connector, typically provides +12V and +5V power. It can deliver a maximum current of up to 11 amps on the +12V rail and 11 amps on the +5V rail, depending on the specific power supply unit (PSU) capabilities. This allows for a total power output of approximately 132 watts when considering both voltage rails. It's mainly used to power older hard drives, optical drives, and other peripherals.
What is a molex cable?
A Molex power connector is a 4-pin power connector found in most computer power supplies. It is used to provide power to large internal drives like hard drives and CD/DVD drives. They are slowly being replaced by SATA power connectors, which are easier to install can cannot be inserted incorrectly. They should not be confused with a Berg connector which is much smaller and is used to power floppy drives. The molex connector is used for IDE drives
Why does the heater fan in your 1992 Ford truck only work on high?
by the blower motor there is a resistor connection, you will find it melted the blower motor is bad. it draws to much power causing the connection to get hot and melt and burn. you will have to change the connector and the blower motor. the blower is still working but its drawing to much power, the motor windings are shorted out inside. disconnect the connector from the resistor and you will see it.
