0
How much power does the Sirius Sportster 5 output to the speakers?
Wiki User
∙ 14y ago
A 5 Watt amp powers the 4" inch integrated speakers. Distortion is estimated at 0.3% @ 1 Watt frequency response.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the output power of home theater speakers?
The output power of home theater speakers can vary by a significant amount depending on which speakers are owned. It can range from 30 watts to 150 watts.
What is the minimum output power of Creative Technologies speakers?
Creative Technologies speakers com from different prices, size, color, and materials. The minimum output power of Creative Technologies speakers is eighteen watts.
Can simple household speakers can be connected in a car?
Its depends on the output power of the device your connecting to.
What size amplifier do I need to power 2 15 700w speakers RMS output power is 350w?
The speakers will work with any amp that outputs less power than 700 watts.
How do you connect 2 computer speakers with a sub-woofer to a flat screen TV?
The TV will need to have AUDIO OUTPUT jacks to connect to the speakers or a amplifier to power the speakers and subwoofer.
How do I activate external computer speakers?
You need to plug the speakers into a sound output plug on your computer; often, the speakers will also require a separate connection to a power source.
What the abbreviation 2500 2500 watts PMPO mean?
PMPO stands for Peak Music Power Output. Its is one of many ways of rating the output capacity of speakers.
Can you run speakers with an amplifier that has a bigger rms rating than the speakers rms rating For example run an 80 watt rms speakers with a 120 watt rms amplifier?
Yes you can. Contrary to popular belief, an amplifier rated with a higher output than the speaker rating rarely damage the speakers. If the amplifier overdrives the speakers, the sound quality will be dramatically affected. Most listeners will turn the level down to reduce the distortion being heard. The amplifier's power rating is the maximum power that it can produce and it does not mean the output power will be at that level. On the other hand, an amplifier that is overloaded will deliver distorted signals to the speakers. At high power levels, the distortion can be damaging to the speakers in a way that simply over driving a speaker is not. Therefore, it is as safe to use an overpowered amplifier with speakers as it is an amplifier that is rated at the same power or even lower power than the speakers.
Will stock Bose speakers be ok with aftermarket headunit in 95 maxima?
Bose speakers are an excellent brand of speakers so just by the brand name I'd say yes. Just make the sure the speakers you're using can handle the power output from your aftermarket receiver. For example, say your unit puts out 4 channels of sound (4 speakers) at 50 watts each, make sure the speakers meet or exceed that output. It is preferred that for any power output you increase the wattage by at least 25-50 watts, preferably 50, but don't go higher than 100 watts above output. What this means that if you are putting out 4 channels of sound for 50 watts each, make sure the speakers are at least 75-100 watts. This way you don't blow them by running too much power nor will you ruin them by giving them too little power. (if you put 150 watt speskers in for example).
What power of amplifier do i need for 6 ohm speakers to connect them to my computer?
Most power amplifiers will handle a load of 6 ohms. The spec you need to look at is the power handling of the speakers. If they are rated for 100 watts program power, then look for an amplifier rated for 100 watts RMS output. Any amplifier can be connected with adapter cables to the typical 1/8" output of your computer.
Which is the best 2.0 speakers under Rs 500?
audionic mini size laptop speakers ( USB based) 300 watts best output result. no external power required.
Can you run 2 80watt rms speakers Max output 600W each and 2 35watt rms speakers Max 300W each with a 60watt rms x 4 at 4 ohms Max output 700W amplifier?
Yes. Peak power or max output is rubbish. You will never get clarity at a speaker or amp's max output. RMS is what it's all about.
