Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How much pressure can the hydraulic put out on an excavator?
Write your answer...
Still have questions?
magnify glass
Related questions

How do you repair a hydraulic excavator?

There are numerous best tips for hydraulic magnet for excavator repairs. You can identify the problem, study repair processes, buy high-quality parts and clean the machine. Another best tip includes contacting a professional if a repair is too complicated, especially if it could put an impact excavator safety. The other routine repair processes are checking machine fluids such as oil, hydraulic fluid, and antifreeze that can be completed without professional assistance.

Is pressure depends on time?

Well, the pressure that's put on you if you need to finish work until a given date surely depends on time. The less time, the more pressure is put on you. If you refer to atmospheric or hydraulic pressure .... no.

Why it is important to be sure that there is no air in the telemotor system?

Hydraulic systems work because liquids are, for all practical purposes, incompressible. When you apply pressure to the master cylinder in a hydraulic system, that pressure is transmitted equally throughout the system.Gases, however, are extremely compressible. When you put pressure on the master cylinder in a hydraulic system in which there is air in the lines, all that happens is that you compress the air in the lines; the pressure is NOT transmitted to the working cylinders.

Can you put antifreeze in hydraulic oil to stop it freezing?

no... one will float on the other and at hi temperatures or hydryrolic pressure will foam or create dangerous pockets in required pressure.

How do you make a simple hydraulic?

Take a tube, put a piston in it, seal off both ends of the tube, and use a liquid, or gas to put pressure in and remove pressure from the tube. As the fluid or gas goes in the tube, the pressure pushes the piston out. As the pressure is released, the piston can recede.

Why would you want to put fluids under pressure?

Because you might need to ...

What establishes the amount of pressure a hydraulic pump will generate?

The pressure generated by a hydraulic pump is determined by factors such as the pump's displacement volume, operating speed, and system resistance. Increasing the displacement volume or operating speed can increase pressure, while higher system resistance will require more pressure to overcome.

How do you check the pressure on the drive motor of a mini excavator?

Put a high pressure gauge within the range of circuit pressure in the pump circuit. Lock the final drive sprocket against the frame so that it can't move. Actuate the travel lever and record the reading on the gauge.

When changing a hydraulic filter, what should you do first 1. Open the cap on the hydraulic tank to check for pressure. 2. Put a drain pan under the filter. 3. Release stored energy in the hydraulic system. 4. Remove relief valve cap.?

Not Sure

How much does a used excavator cost?

Used excavators can vary in price and quality a large amount. However, if one would try to put a price tag on a reasonable quality used excavator, one would say it costs around 20,000 dollars.

How much hydraulic fluid do you put in your 1965 404 international trACTOR?

Should hold about 7 gallons.

How much pressure does it take to put on a fan belt?

On what?