It depends on whether the pipe is open or closed and what it contains. If the pipe is full of water to a height of 40 m and open at the top, the pressure at the bottom is about 57 psig. The diameter doesn't matter.
Plunger is used in diesel engine fuel injection system which meters the fuel into combustion chamber. Higher the plunger diameter, higher the fuel injected into the cylinder. The plunger diameter of a typical diesel engine could be 9-10mm. Cam disk is connected to the plunger and each revolution, plunger will diesel 4 times into the combustion chamber.
Cubic Meters Per Hour:A measurement of airflow that indicates how many cubic meters of air pass by a stationary point in one hour. Cubic meters per hour is abbreviated m³/hr.
1 liter per second is equal to 3.6 cubic meters per hour.
1 Knot = 0.514444444444444 Meters per Second different calculations also use 0.5148
There are wind turbine towers that are as tall as 262 feet, installed in Texas, according to a scientific paper titled, "LARGE SCALE DEPLOYMENT OF RENEWABLE ENERGY BY COMBINING WIND FARMS WITH SOLAR THERMAL POWER PLANTS."
A cylinder with a diameter of 7 meters and a height of 12 meters has a volume of 461.81 cubic meters.
A cylinder with a height of 20 meters and a diameter of 10 meters has a surface area of 785.4m2
A cylinder that has a diameter of 10 meters and a height of 3 meters has a surface area of 251.33m2
A cylinder with a height of 10 meters and diameter of 4 meters has a surface area of 150.8m2
1319.47 meters squared
Your diameter is double the radius. So the diameter is 6
The dimensions appear to be incorrect because 90% of 14 meters is 12.6 meters giving the attached hemisphere a height of 1.4 meters and not 0.7 meters as in the question.Surface area = (pi*2.052)+(pi*4.1*12.6)+(2*pi*2.052) = 201.902 square meters
The volume of this cylinder is: 9.425 m3
2.5019 METER
Cannot. If you do not know the angle of the cone, you cannot determine its height.
The curved surface area is 502.65m2
The volume is 461.81 cubic meters.