$1,233,451,333.99
The brake fluid used is DOT 3
changing clutch in 1994 ford ranger ===================================================================== If it is like the ( 1996 ) Ford Ranger The clutch fluid reservoir is in the engine compartment , it is between the Power Distribution Box and the drivers side fender , It takes DOT 3 brake fluid
What size is the steel brake line tubing on a 1994 Ford Ranger
The 1994 Ford Probe has a brake fluid reservoir that should be mounted on the drivers side firewall. Remove the cap on top to add fluid.
DOT-3 brake fluid.
I recommend you use only genuine Honda Brake Fluid DOT3 but you can use another brand as long as it is DOT3.
No, do not mix trans and brake fluids. The trans is dextron and the brake fluid is dot3.
D O T ( 3 ) brake fluid
For a 1994 Ford Thunderbird : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A )
I know that a 1994 ranger with a manual trans. uses automatic trans. fluid
First off check ur brakes in front but with e-brake causing it to glow brighter then most likely check the back brakes. ANSWER Check your brake fluid level in the brake master cylinder in your engine compartment . The brake light comes on when your brake fluid level is low , or your emergency brake is on.
If It is the factory res, then it should be screw off.