Probably about $300 Is it IRS or Non-IRS?
If your Mechanically minded you can do it on your own quite easily.
http://forums.justcommodores.com.au/vr-vs-holden-commodore-1993-1997/61054-irs-diff-removal.html
This link tells you how.
You will need:
* Jack
* Car Stands
*Spanners, Sockets, Screw Drivers and geral tools
*WD-40 (or some kind or penatrant lubricant)
* Locktite (use on diff mounting bolts when installing)
The drive shaft bolts and cv joint hex nuts can be hard to get off so spray with WD-40 and tap with hammer and screwdriver under the lip of the nut to break the thin layer of rust.
They will come strait off.
Hope that helps
on the ground, what is the safe method to drop diff from 1996 statesman
how do I change the pads and rotors on a VS Commodore ?
Holden VS Commodore was created in 1995.
if you mean color codes then tryhttp://web.archive.org/web/20050329073316/http://www.holden-vs-ford.com/install-head-unit.php
How do you adjust rear band on transmission for a vs commodore 6hdd?f
They are the aliens from planet marlboro
the answer is 56
You can find a wiring diagram for a VS Commodore Dash inside the owner's manual. You can also check with local auto part stores.
There are 3 different engines available to the VS Commodore. First is a 3.8L ECOTEC V6. The second is a 5L V8 and the third is a 5.7L V8 (an enlarged version of the 5L ) only available to the "SENATOR" version of the VS.
14.9 NM / 11lb.ft
haha immobaliser might be on lol
tacho surge