Approx 544 Imperial gallons.
A 100-foot hose with an inside diameter of five inches can hold 102 US gallons of water.
A 2.5 inch fire hose has a capacity of approximately 60 gallons per 100 ft. Therefore, a 50 ft hose would hold around 30 gallons of water.
1.03 gallons
There need not be any water at all in the hose! The capacity of the hose is 3.41 cubic feet.
A standard fire hose is 50 feet long. A hose this length with a 2-inch radius grants about 4.36 cubic feet. This volume holds 32 gallons of water.
Depends on the water pressure, and the diameter and length of the hose. Sorry, but there really is no one answer.
Roughly 1 gallon for every 18 inches of hose.
Easily! A normal garden hose will typically use 360 gallons a minute. 540 liters is equal to 142 gallons.
The gallons per hour that come out of a hose depends upon two things: the diameter of the hose, and the water pressure. Since both of these vary, there is no single answer to that question. However, a one inch diameter garden hose at an average household water pressure could be expected to yield about 200 gallons per hour, in my estimation. Your mileage may vary.
A typical garden hose delivers water at a rate of around 5 to 10 gallons per minute (GPM).
3
The amount of water used by a soaker hose for watering plants in a garden varies depending on factors like the length of the hose, water pressure, and duration of watering. Generally, a soaker hose uses about 1-2 gallons of water per hour.